Manual

Basic adjustment settings
Automatically adjusts the brightness of the screen,
Press MENU and the MENU screen displays.
Press _/1_ to select 'Picture".
Press _,/V to select "OPC".
Press _/1_ to select "On" or "On: Display".
Off The brightness is fixed at the value set in
"Backlight" (see page 44)
On
On: Dispmay
Automatically adjusts
Displays the OPC effect on the screen while
adjusting the brightness of the screen
,, When set to "On", the OPC senses the surrounding light
and automatically adjusts tile backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect ks abilky to sense surrounding light,
,, When set to "On: Display", OPC effect displays on the
screen while OPC is adjusting the screen brightness.
Color tone is managed using the six-color adjustment
setting,
Press MENU and the MENU screen displays.
Press _/1_ to select "Picture",
Press _,/V to select "Advanced", and then
press ENTER,
Press ,A/IF to select ' C,M,S-Hue", and then
press ENTER
,, Yeu can select "C,M.S-Saturation" or "C,M,S-
Value" here instead of selecting "CM,S-Hue".
Press ,A/V to select a specific adjustment
item, Press _/_ to adjust the item to your
desired position,
C. M. S.-Hue
c.M.S-Hue
C.M.S-
Saturation
C.M.S-
This is a standard to adjust the color either
more reddish or mere bluish in tone,
Increases or decreases the saturation of a
selected color
A higher value makes the image brighter
A lower value makes the image darker
,_ For resetting all adjustment items to the factory preset
values, press A/tY to select "Reset", and then press
ENTER,
Q -45