Manual

Useful adjustment settings
Allows you to select what controls the audio output.
Press MENU and the MENU screen
displays.
Press 4/_ to select _;
(AUDIO).
Press A/Y to select "SPEAKERS".
Press 4/_ to select "ON" or "OFF".
AUDIO
MTS STEREO
BASS 25
TREBLE 25
BALANCE 0
LI_:SELECT t,..._:ADJUST
ON * Sound via speaker is adjusted with
VOL +/- on the remote control unit or
VOL -/+ on the TV.
. Sound via the AUDIO OUTPUT
terminal is not adjustable and outputs
at a consistent level.
OFF * Sound via the AUDIO OUTPUT
terminal is adjusted with VOL +/- on
the remote control unit or VOL -/+ on
the TV.
• Sound via speaker is muted.
Press EXIT to return to the normal screen.
Allows you to set a time when the TV automatically
switches to standby.
FA_E
is PASo I
Each time you press SLEEP, the remaining
time setting switches as shown below.
SLEEP 14,,
OhOOm
(SFeeptimeroff)
,j.
SLEEP
0hl0m
J
step up by 10 minutes
SLEEP j
lh50m
SLEEP ]
2h00m
This display will disappear after a few
seconds, the sleep timer automatically
starts counting down.
• If you want to adjust the sleep timer again, you
can press SLEEP repeatedlly then change the
time setting.
Press SLEEP.
• The remaining time displays when the sleep
timer has been set.
SLEEP J
0h07m
• Select "0h00m" by pressing SLEEP repeatedly to cancel
the sleep timer.
• The TV will enter the standby mode when the remaining
time reaches zero.
(_- 29