Manual

Using external equipment
You can use the INPUT5 or 6 terminal when connecting HDMI equipment.
When using an HDMI-DVI
conversion cable, use INPUT5
and AUDIO terminal.
HDMI cable (Commercially available)
HDMI equipment
To watch an HDMI equipment image, select
"INPUT5" or "INPUT6" from "SOURCE
SELECTION" menu using INPUT on the
remote control unit or on the TV. (See page
23.)
8OURCE SELECTION
0, TV
1. INPUT1
2, INPUT2
3. INPUT3
4. INPUT4
6, INPUT6
[0-6]:SELECT
• Refer to your external equipment operation manual for
the signal type.
Press MENU and the MENU screen
displays.
Press 4/_ to select #_ (AUDIO).
Press A/Y to select "HDMr'.
Press 4/1_ to select "HDMr' or "DVr'.
AUDIO
A
W0W SffS3U OFF
FOCUS OFF
TruBass OFF
V
_:SELECT I_:ADJUST
HDMI: When you connect the HDMI device to
the TV, select this setting.
DVI: When you connect the DVl device to
the TV with analog audio cords, select
this setting.
Press EXIT to return to the normal screen.
(_- 25