User Manual

47
Using external equipment
Displaying broadcasts via an HDTV tuner
To watch an HDTV tuner image, select “INPUT3” from
“INPUT SOURCE” menu using b on the remote
control unit or INPUT on the Display.
The setting is stored and can be selected in the “INPUT
SOURCE” menu.
NOTE
• Each time b is pressed, the input source toggles.
• If the HDTV tuner image does not come in clearly, you
may need to change the input signal type setting on the
“Input Select” menu.
• See page 55 for how to select the signal type.
• Below are signal types used for COMPONENT connection.
480i (60Hz), 480p (60Hz), 580i (50Hz), 580p (50Hz), 720p
(60Hz)
1
, 1080i (50Hz
2
/60Hz)
1 Auto-detects video signal frequency.
2 1080i (50Hz) corresponds to a SMPTE275M signal.
(Horizontal frequency is 28.125kHz.)
(For INPUT3 signal)
AVC System (rear view)
HDTV tuner
Watching broadcasts via an HDTV tuner
Connecting an HDTV tuner
You can use the INPUT 3 terminal when connecting an HDTV tuner and other audiovisual equipment.
Component cable
(commercially available)
AV cable (commercially available)
S-video cable
(commercially available)
When using component
cable, select
“COMPONENT” for
“Input Select” in the
menu.
MENU
[
Option
...
Input Select
]
AUTO
COMPONENT
S-Video
Video
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
LC-37AA1M(E)-f 03.11.6, 10:50 AM47