Specifications

46
Using external equipment
AVC System (rear view)
VCR
Watching a VCR image
Connecting a VCR
You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.
Displaying a VCR image
To watch a VCR image, select “INPUT2” from the
“INPUT SOURCE” menu using TV/VIDEO/PC on the
remote control unit or INPUT on the Display.
The setting is stored and can be selected in the “INPUT
SOURCE” menu.
NOTE
• Each time TV/VIDEO/PC is pressed, the input source
toggles.
• If the VCR image does not come in clearly, you may need
to change the input signal type setting on the “Input Select”
menu.
• Refer to your VCR operation manual for the signal type.
• See page 54 for how to select the signal type.
S-video cable
(commercially available)
(For INPUT2 signal)
AV cable (commercially available)
MENU
[
Option
...
Input Select
]
AUTO
S-Video
Video
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
LC-37AA1H(E)-f 03.11.6, 8:23 AM46