Specifications

45
Using external equipment
AVC System (rear view)
DVD player
Component cable (commercially available)
S-video cable
(commercially available)
When using
component cable,
select
“COMPONENT” for
“Input Select” in the
menu.
Watching a DVD image
Connecting a DVD player
You can use the INPUT 1 terminal when connecting to a DVD player and other audiovisual equipment.
Displaying a DVD image
To watch a DVD image, select “INPUT1” from “INPUT
SOURCE” menu using TV/VIDEO/PC on the remote
control unit or INPUT on the Display.
The setting is stored and can be selected in the “INPUT
SOURCE” menu.
NOTE
• Each time TV/VIDEO/PC is pressed, the input source
toggles.
• If the DVD image does not come in clearly, you may need
to change the input signal type setting on the “Input Select”
menu.
• Refer to your DVD player operation manual for the signal
type.
• See page 54 for how to select the signal type.
• Below are signal types used for COMPONENT connection.
480i (60Hz), 480p (60Hz), 580i (50Hz), 580p (50Hz), 720p
(60Hz)
1
, 1080i (50Hz
2
/60Hz)
1 Auto-detects video signal frequency.
2 1080i (50Hz) corresponds to a SMPTE275M signal.
(Horizontal frequency is 28.125kHz.)
(For INPUT1 signal)
AV cable (commercially available)
MENU
[
Option
...
Input Select
]
AUTO
COMPONENT
S-Video
Video
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
LC-37AA1H(E)-f 03.11.6, 8:23 AM45