Manual
Appendix
m The error message about reception of broadcast
The example of an error message
displayed on a screen Error code Possible Solution
• Check the antenna cable. Check that the antenna is correctly
• Failed to receive broadcast. 1=202 setup.
• No broadcast now. 1=203 • Check the broadcast time in the program guide.
m The cautions about i.LINK
Caution sentence Possible Solution
• Record/Playback may fail on the selected model. • Displayed when you have selected a device that is not
compatible with the TV, or that does not have DTLA copy
protection technology installed.
• Wrong connection or no i.LINK connection was • Displayed when a problem is experienced with a connection
found. Refer to Operation Manual on connection, using i.LINK cable. Check the connection, and re-connect the
cable if necessary.
• The selected model is disabled to record/play. • Displayed when the device you have selected is already being
Check that no other model is used. used by another i.LINK connected device. To operate the
selected device from the TV, you will first have to override
control from the other device.
PC/MAC Resolution VESA Standard
PC
VGA
640 x 400 O
720 x 400
640 x 480
WVGA 848 x 480
SVGA
XGA
800 x 600
1024 x 768
HorizontalFrequency
31.5 kHz 60
37.9 kHz 85
31.5 kHz 60
37.9 kHz 85 0
0
0
0
0
31.5 kHz 60
37.9 kHz 72
37.5 kHz 75
43.3 kHz 85
31.5 kHz 60
35.1 kHz 56
37.9 kHz 60
48.1 kHz 72
46.9 kHz 75
53.7 kHz 85
48.4 kHz 60
56.5 kHz 70
60.0 kHz 75
68.7 kHz 85
45.0 kHz 60
48.1 kHz 60
64.0 kHz 60
34.9 kHz 67
49.7 kHz 75
60.2 kHz 75
Vertical Frequency
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
Hz
O
O
O
O
O
O
O
O
O
1280 x 720
WXGA
1280 x 768
SXGA 1280 x 1024 O
MAC13" VGA 640 x 480
MAC16" SVGA 832 x 624
MAC19" XGA 1024 x 768
Apple and Macintosh are registered trademarks
of Apple Computer, Inc.
DDC is a registered trademark of Video Electronics
Standards Association.
Power Management is a registered trademark of
Sun Microsystems, Inc.
VGA and XGA are registered trademarks of
International Business Machines Co., Inc.
-93