Manual

Useful adjustment settings
,, Some input signals may have to be registered manually
to display properly.
,, The pairs of input signals (resolutions) in the list below
are not distinguishable when received. In such case, you
have to set the correct signal manually. After setting once,
it will display when the same signal (resolution) is input
again.
640 × 400 720 × 400
640 × 480 848 × 480
1024 × 768 1280 × 768
Produces a clearer video image.
Press MENU and the MENU screen displays.
Press 4/1_ to select "Option".
Press A/T to select "Digital Noise
Reduction", and then press ENTER.
,, You can only select the "Input Signal" on the Setup menu
when receiving one of the 6 input signals listed above.
-- FAVORITE OH --
Press A/T to select the desired level, and
then press ENTER.
Press MENU and the MENU screen displays.
Press 4/1_ to select "Setup".
Press A/T to select "Input Signal" and then
press ENTER.
Press A/T to select the desired input signal
on the display.
Example
When listening to music from a music program, you
can set the Liquid Crystal display off and enjoy audio
only.
Repeat steps 1 and 2 in Digital Noise
Reduction.
Press A/T to select "Audio Only", and then
press ENTER.
Press 4/1_ to select "On", and then press
ENTER.
On Audio is output without screen image.
Off Both screen images and audio are output.
-70