Manual

Using external equipment
Please use the INPUT 4 terminal when connecting HDMI equipment.
HDMI equipment
To watch an HDMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using iNPUT on the remote control unit or
on the TV. (See page 66.)
--e INPUT4
Press MENU and the MENU screen displays.
Press 4/1_ to select "Option".
Signal
Type
Color
Matrix
Dynamic
Range
Auto View
Press A/T to select the desired item and
press ENTER.
Press A/T/4/I_ to select the desired setting
and press ENTER.
Auto/RGB/YCbCr
4:4:4/YCbCr 4:2:2
Auto/ITU601/
ITU709
Standard/
Out of Standard
Enable/Disable
Select the signal type from
an HDMI terminal. Unless
the image quality looks
obviously poor, select Auto.
Select the internal color
space conversion method
when an RGB signal is
input. Normally, select
Auto.
Select the signal amplitude
range. Normally, select
Standard.
Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal.
Press A/T to select "HDMI Setup", and then
press ENTER.
,, Refer to your external equipment operation manual for
the signal type.
i_y Option
(]_) -56