Manual

Basic adjustment settings
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can confirm the antenna
configuration through the "Antenna Setup - DIGITAL"
screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
Press MENU and the MENU screen displays.
Press 4/1_ to select "Setup".
Press A/T to select "Antenna Setup -
DIGITAL", and then press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 77 for
setting a secret number.
Press A/T to select "Signal Strength".
• The signal strength of the DIGITAL(Air) antenna
is displayed. The signal information is based
on the current channel.
Standby Mode may be set to either start the TV quickly
from standby or conserve energy while on standby.
Press MENU and the MENU screen displays.
Press 4/1_ to select "Setup".
Press A/T to select "Standby Mode", and
then press ENTER.
Press A/T to select "Model" or "Mode2",
and then press ENTER.
Model Starting TV is quick from standby.
Mode2 Power consumption is small at the
standby.
Channel Strength
= The channel signal strength can also be checked
separately.
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup = DIGITAL = Air.
Press A/T to select "Channel Strength", and
then press ENTER.
Input the 2-digit channel number to check
the signal strength of the selected channel.
Make sure the appropriate signal strength of
each channel received is obtained.
This function is available for DIGITAL (Air) only.
-42