Manual

Basic adjustment settings
Channel search Channel memory setting
Channel auto search makes the TV lookfor all channels
viewable in the set area. Press MENU and the MENU screen displays.
Press MENU and the MENU screen displays.
Press 4/1_ to select "Setup".
Press 4/1_ to select "Setup".
Press A/T to select "CH Setup", and then
press ENTER.
,, If you already set the Secret No., input the 4-
digit secret number here. See page 77 for
setting a secret number.
Press A/T to select "CH Search", and then
press ENTER.
Press 4/1_ to select "Yes" for ANALOG, then
press T to move down.
Press 4/1_ to select "Yes" for DIGITAL (Air),
then press T to move down.
Press 4/t_ to select "Yes" for DIGITAL
(Cable), and press T to move down.
Select "Search Start", and then press
ENTER.
!!
Example: CH Search
ANALOG Air [ 25] Found [ 20] J
!
DIGITAL Air [ 25] Found [ 20] J
!
DIGITAL Cable [ 25] Found [ 25] J
Press A/T to select "CH Setup", and then
press ENTER.
,, If you already set the Secret No., input the 4-
digit secret number here. See page 77 for
setting a secret number.
Press A/T to select "CH Memory", and then
press ENTER.
Press A/T to select ANALOG, DIGITAL (Air),
DIGITAL (Cable) and CableCARD, and then
press ENTER.
Perform the following steps after confirming
the type of antenna connection made with
your TV, and the channel type selected in
Step 5.
When viewing ANALOG broadcasts:
(_ Press J,/T, and then press _1/_ to select
the channel to skip or not.
(_) Press A/T to select "Skip", and then press
_1/1_ to select "On" or "Off".
When viewing DIGITAL broadcasts:
(_ Press A/T to select the channel to skip or
not, and then press _1/_ to select "On" or
"Off".
,, On: Skips channels. (Channel selection disabled using
CHA/V.)
,,off:Does notskipchannels.(Channelselectionenabled
using CHA/V.)
,, Make sure what kind of connection is made with your TV.
,, Make sure what kind of connection is made with your TV.
(]_})-41