Manual
Basic adjustment settings
Power control setting allows you to save energy.
No signal off
When set to "Enable", the power will automatically shut
down if no signal inputs for 15 minutes.
Press MENU and the MENU screen displays.
Press 41/1_ to select "Power Control".
This setting allows you to optimize the settings of Digital
broadcasting.
You can output digital audio to an AV amplifier or similar
device whose DIGITAL AUDIO INPUT terminal is
connected to the DIGITAL AUDIO OUTPUT terminal
on the TV (see page 30). Please select an audio output
format compatible with the audio format of the program
you are watching and the equipment connected.
Press A/Y to select "No Signal Off", and
then press ENTER.
Press 41/1_ to select "Enable", and then
press ENTER.
,, Five minutes before the power shuts down,
remaining time displays every minute.
Press MENU and the MENU screen displays.
Press .,9/1_ to select "Digital Setup".
Press A/V to select "Audio Setup", and then
press ENTER.
® "Disable" is factory preset value.
® When a TV program finishes, this function may not operate.
No operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
Repeat steps 1 and 2 in No signal off.
Press A/Y to select "No Operation Off", and
then press ENTER.
Press _t/1_ to select "Enable", and then
press ENTER.
,, Five minutes before the power shuts down,
remaining time displays every minute.
Press A/T to select "PCM" or "Dolby
Digital", and then press ENTER.
Dolby Digital
PCM
Dolby Digital
The optical output terminal outputs
audio signal by PCM form. If your
digital audio system does not
support Dolby Digital, select
"PCM".
The optical output terminal outputs
audio signal by Dolby Digital form.
It reproduces sound from surround
program of digital.
® "Disable" is factory preset value.
Q -28