Manual

Basic adjustment settings
Channel memory setting
Press MENU and the MENU screen displays.
Press _/_ to select "Setup".
Press A/Y to select "CH Setup", and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 40 for
setting a secret number.
Press A/V to select "CH Memory", and then
press ENTER.
Press A/Y to select ANALOG, DIGITAL (Air),
DIGITAL (Cable) and CableCARD, and then
press ENTER.
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can confirm the antenna
configuration through the "Antenna Setup - DIGITAL"
screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
Press MENU and the MENU screen displays.
Press 41/1_ to select "Setup".
Press A/Y to select "Antenna Setup -
DIGITAL", and then press ENTER.
® If you already set the Secret No., input the 4-
digit secret number here. See page 40 for
setting a secret number.
Perform the following steps after confirming
the type of antenna connection made with
your TV, and the channel type selected in
Step 5.
When viewing ANALOG broadcasts:
Press ,A/T', and then press 41/_ to select
the channel to skip or not.
Press A/T' to select "Skip", and then press
4/Ib- to select "On" or "Off".
When viewing DIGITAL broadcasts:
Press A/T to select the channel to skip or
not, and then press 41/1_ to select "On" or
"Off".
®On: Skips channels. (Channel selection disabled using
CHA/V.)
®Off: Does not skip channels. (Channel selection enabled
using CHA/V.)
Press A/Y to select "Signal Strength".
® The signal strength of the DIGITAL (Air) antenna
is displayed. The signal information is based
on the current channel.
Signal Strength
Channel Strength
• The channel signal strength can also be checked
separately.
® Make sure what kind of connection is made with your TV.
Repeat steps 1 to 3 in Signal Strength in
Antenna Setup =DIGITAL.
Press A/V to select "Channel Strength", and
then press ENTER.
Input the 2-digit channel number to check
the signal strength of the selected channel.
®Make sure the appropriate signal strength of
each channel received is obtained.
,, This function is available for DIGITAL (Air) only.
Q -22