Operation Manual

6
Power connection
Antenna connection
Connect to the DC input terminal of the product.
Plug into an AC outlet.
AC cord*
AC adapter
* Product shape varies in
some countries.
POWER INPUT
DC 13 V
NOTE
teote:
• Always turn the W (MAIN POWER) switch of the LCD TV set to OFF when connecting the AC adapter.
• Unplug the AC adapter from the LCD TV set and power outlet when the LCD TV set is not to be used for a long period of
time.
Household
power outlet
Pull down the
hook to open
the cover.
WW
WW
W (MAIN POWER)
Preparation
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
(commercially available)
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are
used for coaxial cable.
Antenna cable (supplied)
For viewing only digital broadcasts, you do not need to connect
the antenna cable.
(ex. For viewing both analogue and digital broadcasts)
(ex. For viewing analogue broadcasts)
Antenna cables–commercially available
If your outdoor antenna uses a 75-ohm coaxial cable with a standard
DIN45325 plug (IEC 169-2), plug it into the
IN DIGITAL terminal at the
rear of the TV.
To POWER INPUT
terminal
• IN DIGITAL and ANALOG (input) terminals are already
connected with the supplied RF cable when shipped from the factory.
• For viewing analogue broadcasts only, disconnect the
supplied RF cable and connect the 75-ohm coaxial cable
(commercially available) to ANALOG (input) terminal.