Operation Manual
54
This enables the selection of the reception mode when receiving an A2 stereo-B/G
signal. To let you enjoy A2 stereo broadcasting, this LCD TV set receives A2
stereo system stereo and bilingual broadcasts.
When receiving stereo broadcasts:
The LCD TV set is receiving a stereo broadcast.
• Each time you press SOUND, the mode changes
between “Stereo” and “Mono”.
• When “Mono” is selected, the TV sound is output
monaurally.
When receiving bilingual broadcasts:
When the LCD TV set is receiving a bilingual programme,
the “Sound 1” mode is automatically selected.
• Each time you press SOUND, the mode changes as
follows:
Sound 1 → Sound 2 → Sound 1+2
→ Mono
A2 stereo broadcasts
Mono
Stereo
Sound 1
Sound 2
Sound 1+2
Mono
NOTE
Note:
• If approximately 3 seconds pass without a button being pressed, the mode setting is
automatically terminated and the LCD TV set returns to normal mode setting.
• The setting can be selected individually for each channel number.
• You can also turn off the A2 stereo mode by setting the “Loudsp. sound” item to “Mono” in
the Sound screen, which is displayed when you press
Green
(see page 36).
Useful Features