Operation Manual

50
AV Connections
It is possible to manually adjust various settings for connections with external
devices on the “AV connections” screen.
[1] AV1/AV2/AV3
Select the appropriate signal type and colour standard for the signals from the
video equipment connected to the AV1, AV2 or AV3 terminal.
Press MENU to display the TV menu.
Press a/b to select “AV connections”, and
then press OK to display the “AV connections”
screen.
Press a/b to select “AV1”, “AV2”, “AV3 (Y/
C)”, and “AV3(CVBS)”, and then press OK to
display the signal type selection screen.
Press a/b to select the desired item, and
then press OK.
Press c/d to select the desired “Signal type”,
“AFC” and “Colour system”, and then press
OK.
Press END to exit.
OK
Back
R
End
E
TV menu
Picture
Sound
Programmes
Features
AV connections
Timer functions
First installation
Language
OK
Back
R
End
E
AV1
AFC [Mode1]
Colour system [ Auto]
Choice/Input valueAdjustment item
Description
Signal type*
AFC
Colour system
Auto, CVBS, Y/C To select the signal type of external equipment.
Mode1, Mode2
To select frequency control modes. Mode1 is suitable for DVD players
or decoders, and Mode2 is suitable for VCRs or Camcorders.
Auto, PAL, SECAM,
N358 (NTSC 3.58),
N443 (NTSC 4.43),
PAL60, PAL-M, PAL-N
Colour norm
* “Signal type” is only visible when the AV2 is selected.
NOTE
Note:
• If no (colour) image displays, try to change the other signal type.
• Depending on the compatibility with the various types of equipment, the picture may become skewed. In this case, select the “AFC”
(Automatic Frequency Control) mode that will improve the picture.
• Switching between AV input signals may be slow, depending on the settings in “Colour system”. If you want to speed up signal
switching, switch “Auto” in “Colour System” to the current reception colour system.
OK
Back
R
End
E
AV1
AFC [Mode1]
Colour system [ Auto]
OK
Back
R
End
E
AV connections
AV1
AV2
AV3(Y/C)
AV3(CVBS)
For programmes
Useful Features
2
1
3
4
5
6