Operation Manual

WIDE mode

You can change the screen size using f (WIDE/T, B, F) on the remote control.

Press f (WIDE/T, B, F) to select the Wide

mode.

Each time you press f (WIDE/T, B, F), the

mode change as follows. You can select the

desired mode.

Panorama

Auto

Normal

Full

Cinema 16:9

Zoom 14:9

NOTE

te:

• WSS (Wide Screen Signaling) information refers to the original wide mode information sent from the broadcasting station.

• The Auto mode is only available during RF reception.

• When Auto is selected, the Panorama mode is selected automatically in the case WSS information indicates the 4:3 mode.

• Try to set WIDE mode if an image does not switch to the correct screen format. When the broadcast signal contains no WSS

information, the function will not work even if enabled.

• EXTERNAL SOURCE: When you are watching the TV-set through the Euro-SCART (AV-IN1 or AV-IN2) and it receives information of

16:9 format (through the audio-video control pin) the TV selects FULL automatically.

• The Wide mode screen will disappear automatically after 4 seconds.

• Depends on the selected screen size, upper and lower part of an image might be cut in DTV mode.

Description

In this mode the picture is progressively streched toward each side of the screen.

For 16:9 squeeze pictures. There are two display settings to choose from.

For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.

The Wide mode is switched automatically based on WSS (Wide Screen Signaling) information

For 4:3 “standard” pictures. A side bar appears on each side.

For 14:9 letterbox pictures. A thin side bar appears on each side, and you may

also see bars on the top and bottom with some programmes.

Selected item

Panorama

Full

Cinema 16:9

Auto

Normal

Zoom 14:9

Panorama

Auto

Full

Cinema 16:9

Normal

Zoom 14:9

Useful features