Operation Manual

36
Sound
Press Green to display the Sound menu.
Press a/b to select the desired adjustment
item, and then press OK.
• Each item can now be selected or the next
menu appears.
Press c/d to make the adjustment.
Press END to exit.
* “Balance” is not selectable when “Dolby Virtual” is set to “on”.
Press Left (c)
Decrease headphones
volume
–
–
–
For weaker treble
For weaker bass
Increase the volume of
the left speaker
Choice/Value range
0 – 60
Stereo ↔ Mono/Sound1 ↔
Sound2 ↔ Sound1+2 ↔ Mono
Nicam ↔ Mono/Mono
(* The choices differ depending on
whether or not a NICAM or IGR signal is
received.) See pages 32 and 33.
Sound1 ↔ Sound2 ↔ Sound1+2
on↔off
-30 – 30
-30 – 30
-30 – 30
Press Right (d)
Increase headphones
volume
–
–
–
For stronger treble
For stronger bass
Increase the volume of the
right speaker
Adjustment item
Headph. vol.*
Loudsp. sound
Headph. sound
AV audio sig.
Dolby Virtual
Treble
Bass
Balance*
NOTE
• In the “AV audio sig.” item, mono-video recorders should select “Sound1” or “Sound2”. Stereo-video recorders should select
“Sound1+2” so that the desired sound can be selected when playing back the video.
OK
Back
R
End
E
Sound menu
Headph. vol. [ 30]
Loudsp. sound [ Stereo]
Headph. sound [ Stereo]
AV audio sig. [ Sound1]
Dolby Virtual [ on]
Treble [ ]
Bass [ ]
Balance [ ]
0
0
0
0
OK
Back
R
End
E
Headph. vol.
30
0
Useful features
2
1
3
4
NOTE
te:e:
• You can also access the Sound menu screen by pressing
MENU, then pressing a/b to select “Sound” (see pages
33 and 34).