Operation Manual

13
Turning on and off the main power
Switching the TV/VIDEO (TV/DTV/AV1/AV2/AV3) mode
Turn on the power of the connected video
equipment.
Press b to select the applicable input
source. The screen displays AV1, AV2 or TV
mode each time b is pressed.
Power/Standby
indicator
W (MAIN POWER)
AV3
DTV
AV1
AV2
1 S06
1 S06
On-screen display
|
Press the
WW
WW
W (MAIN POWER) switch. The
power/standby indicator instantaneously
changes from red to green and the main unit
is turned on.
|
To turn off the main power, press the
WW
WW
W (MAIN
POWER) switch.
To turn off the LCD TV
Press B. The power/standby indicator will turn red.
To turn the LCD TV back on
Press B again. The power/standby indicator will turn green.
ON/OFF standby
Basic operation
2
1
NOTE
• About the video modes
TV: Select this when viewing analogue TV broadcasts.
DTV: Select this when viewing digital TV broadcasts.
AV1 and 2: Select this when viewing the signals
from the video equipment connected to
the AV-IN 1 and 2 terminals.
AV3: Select this when viewing the signals
from the video equipment connected to
the AV-IN 3 terminals using the VIDEO
or S-VIDEO terminal for video input.
• If both VIDEO and S-VIDEO terminals are connected
with cables, the S-VIDEO input terminal is selected as
the high priority.
Listening with headphones
■ Plug the headphone mini-plug into the headphone jack located on the front of the TV set.
NOTE
• Headphones are not included in the supplied accessories.
• Even if a headphone mini-plug is connected to the headphone jack, sound can be heard from the main unit speaker.
OK
Back
R
End
E
Headph. vol.
30
0
Please refer to page 36 to adjust the
sound volume.
Headphones
NOTE
• The On-screen indicator disappears after a few
seconds.