Manual

I Selectingthelocation-- Selectaplacewithnodirectsunlightandgoodventilation.
productisdroppedorappliedwithimpact.Becarefulnottobeinjuredbybrokenglasspiecesin
casethepanelbreaks.
• he Liquid Crystal panel is avery high technology product with 921,600 thin film transistors, giving you fine picture details. |
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this
J
does not affect the performance of your product.
I To prevent fire, never place any type of candle or flames on the top or near the TV set.
I o prevent fire or shock hazard, do not expose this product to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• UseasoftclothandgentlywipethesurfaceofthedisplaypaneI. Using a hard cloth may _ _ _
scratch the panel surface. _[ ,_ _ _ _
Use a soft damp cloth to gently wipe the panel when it is really dirty. _ "t_, r.........._,C_,_
(it may scratch the panel surface when wiped strongly.) _ [ _-"_"_)
If the panel is dusty, use an anti-static brush, which is commercially available, to clean it. "_ I j uu Q_
To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such _ 7T_
materials may damage the panel surface.
• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.
_. display a picture a long time, as cause an afterimage )
Do not still for this could to remain.
Install the the where the AC cord be from the AC outlet. )
product place unplugged easily
on can
LOCATION
For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation:
• Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom
of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
• Install the unit in a horizontal position.
• Avoid locations subject to strong vibration.
• Do not place the unit near strong magnetic fields.
• Avoid moving the unit to locations where temperature differences are extreme.
• Be sure to unplug the AC power cord from the outlet before carrying the unit.
TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE
• Do not handle the power cord with wet hands.
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
• If, by accident, water is spilled on the unit, unplug the power cord immediately and take the unit to our authorized service
center for servicing.
• Do not place anything directly on top of the unit.
EN