Specifications

VIDEO MONITORS
564
PREMIER MOUNTS
PSD-FS
“Cobra” Floor Stand Adapter
Designed to enhance the slim lines of all large screen plasma displays, the
PSD-FS "Cobra" floor stand adapter adds function as well as great looks to any
floor mounted plasma display system. Constructed of heavy gauge steel and easy
to assemble, the PSD-FS when mated with any of Premier’s "flat style" plasma
display mounts, will safely hold the plasma display at the proper center of grav-
ity position. The PSD-FS floor stand adapter also allows for vertical mounting
of those monitors capable of vertical "bill board" type operation.
PSD-S90
Horizontal Swing Out/Swivel Wall Mount Adapter
Designed to mount on 16" wood stud center pairs, solid or reinforced
walls, the PSD-S90 when mated to a Premier "flat style" mount, allows
for optimum placement of the plasma monitor for the viewing audience.
Once installed the plasma monitor can be pulled out up to a 90° angle
from the wall with the additional benefit of almost 180° swivel from the
end of the adapter. The PSD-S90 also allows for vertical mounting for
those monitors capable of vertical "bill board" type operation.
■ Center of screen viewing height is
adjustable from 44" to 50" making the
PSD-FS adapter ideal for home, board-
room or convention exhibit display types.
■ Power and signal cables can be routed up
through the stand between the stiffener
braces that run the length of the stand to
minimize cable visibility.
■ Optional PSD-SH (23
1
/
2"W x 17
1
/
2" D)
equipment shelves can be easily inserted
into any of three various height insertion
points within the stand.
■ Weighs 85 lbs.
Color: Hammer Silver/Black
Ships: 2 containers
■ Constructed of heavy gauge steel the
PSD-S90 can easily handle large screen
plasma displays weighing up to 150 lbs.
(properly installed).
■ The back plate of the PSD-S90 has par-
tial "knock outs" to bring power and sig-
nal cables directly into the back of the
display minimizing the cable's visibility.
■ The PSD-S90 is only 2
1
/2
" deep when
placed flat against the wall for storage.
The PSD-S90 shown with the
PDM-500F mount installed on the
Sony PFM-500A2W monitor
Sony PFM-500 A2W 42" plasma display
shown with the PDM-500F plasma mount
installed on the PSD-FS "Cobra" floor stand.
PSD-S90 Horizontal Swing Out/Swivel Wall Mount Adapter (requires the Premier “flat style” plasma display mount) .........................................249.95
PSD-FS “Cobra” Floor Stand Adapter.............................................................................629.95
Note: The PSD-FS requires the Premier “flat style” plasma display mount which must be added (see next page)
Most Orders Shipped Within 24 Hours
Premier also offers custom “in wall” mounts, wall/ceiling mounted protective enclosures,
and horizontal or vertical table top stand adapters for large screen plasma displays