Specifications

PVM-20S1W
VIDEO MONITORS
560
SONY
20-inch 16:9 Production Monitor
The PVM-20S1W incorporates all of the superb features of Sony production
monitors for 16:9 viewing in post-production and broadcast stations. It fea-
tures multi-system compatibility, blue gun, underscan and H/V delay. It also
offers flexible signal connections, a full range of optional functions and ease
of operation.
7-Day Customer Satisfaction Guarantee
Input Versatility
■ Two composite (BNC), S-Video and
component (R-Y/B-Y or analog RGB)
input/output for system flexibility.
■ Accept SDI signals by installing the
optional BKM-101C interface kit for
video and BKM-102 for audio.
■ External sync input for synchronization
with other equipment.
■ Automatic and manual degaussing
■ Parallel remote control and Tally can be
operated via a 20-pin connector.
■ RS-422 serial interface permits all moni-
tor functions to be remotely controlled
when the optional BKM-103 RS-422 ser-
ial remote control kit is installed.
Conveniences
■ On-screen menu display in English,
French, German, Spanish or Italian.
■ Sub control mode allows fine, on-screen
adjustment of the center “detent” value of
the contrast, brightness, chroma and
phase knobs. A particular level can be set
for the center click position so that multi-
ple monitors can all be set to the same
reference level.
■ In addition to controls on the front panel,
a user memory is available for brightness,
chroma, phase, contrast, aperture and vol-
ume control settings in the menu mode.
■ Can be rack mounted in a 19-inch rack
with the optional SLR-103A Slide Rail
Kit.
Super Performance
■ 20-inch wide tube facilitates comfortable
16:9 picture viewing. Dark tint panel
provides high contrast images. Aspect
ratio is 16:9/4:3 switchable.
■ A true multi-system monitor, it handles
NTSC, NTSC 4.43, PAL, and SECAM.
All signal types are automatically selected.
■ Comb filter with enhanced pulse response
ensures accurate luminance and chromi-
nance separation is achieved.
■ Beam current feedback circuit for long-
term stability of color reproduction.
Production Features
■ Color temperature is switchable between
6500K/9300K/User preset. 6500K is the
broadcast standard and is factory preset.
9300K is for a more pleasing picture. User
preset is 3200K to 10,000K.
■ Blue gun only mode allows color level
adjustments as well as noise level checks
to be easily done.
■ Underscan mode displays the entire active
picture area, allowing you to view the
entire image and check the picture edges.
■ H/V delay function allows viewing of the
blanking area and sync/burst timing by
displaying the horizontal and vertical
intervals in the center of the screen.
■ Automatic Chroma/Phase setup facilitates
monitor adjustment. Using color bars as a
reference, this function automatically cali-
brates chroma and phase. Especially con-
venient when used with non-linear editing
systems to align the color reproduction of
the video signal output.
FERAL QS-440 Quad Split
The QS-440 is
a multiple input
display and re-
sizing device
that accepts
one, two, three, or four video inputs with the ability to combine them into a single video
output. Each input is independently scalable, allowing for resizing vertically and/or hori-
zontally, and each can be independently positioned.
The QS-440 offers composite and Y/C inputs and outputs, automatically transcoding
between the two formats. Each input is a full-frame buffer TBC, accepting asynchronous
inputs with standard operation in NTSC or PAL. Designed for ease of operation, it accepts
genlock inputs and is fully controllable via RS-232.
Equipped with a powerful scaling engine and digital comb filter, the QS-440 offers image
cropping, independent channel scaling and aspect control, edge enhancement, and source
ID with independent channel OSD. All this with exceptional reduction in stair-stepping,
jagged edges, pixelation, and line-loss often found in less advanced video scaling devices.
At 1RU high, the QS-440 is ideal for ENG vans, production suites, the desktop — any
application where you need to combine multiple video inputs into one video output display.
FEATURES