Specifications

–34–
SVBK-100
Sony 33-pin Interface Board
(for SVO-9620/9500MDP and
SVP-9020)
•When this board installed, VTR functions
can be remotely controlled via 33-pin
parallel interface
Connector: 33-pin multi connector (1)
Parallel control signal
Dimensions: 168 (W) × 92 (H) × 60 (D) mm
(6
5
/8 × 3
5
/8 × 2
3
/8inches)
Mass: 330 g (11 oz)
SVBK-110
Sony 34-pin Interface Board
(for SVO-9500MDP)
•When this board installed, the
SVO-9500MDP can be integrated into the
34-pin based control system
Connector: 34-pin multi connector (1)
Parallel control signal
Dimensions: 168 (W) × 92 (H) × 60 (D) mm
(6
5
/8 × 3
5
/8 × 2
3
/8inches)
Mass: 300 g (11 oz)
SVBK-120
Computer Interface Board
(for SVO-9620/9500MDP and
SVP-9020)
•Provides RS-232C interface which
enables direct control of a VTR from an
external computer
Connector: D-sub 25-pin multi connector (1)
Parallel control signal
Dimensions: 168 (W) × 92 (H) × 60 (D) mm
(6
5
/8 × 3
5
/8 × 2
3
/8inches)
Mass: 300 g (11 oz)
SVBK-140
Sony RS-422A Interface Board
for
SVO-9620 and SVP-9020
•By installing this board, the SVO-9620/
SVP-9020 can be equipped with 9-pin
REMOTE (RS-422A) interface to be
configured into Sony’s 9-pin based control
system
Input/output connector:
TC IN: BNC (1)
0dB∫6dB (0dB=1.55Vp-p)
10kΩ, unbalanced
TC OUT: BNC (1)
0dB∫3dB, low impedance,
unbalanced
MONITOR OUT: BNC (1)
Supplied accessories: Screw
Operation manual
VIDEOCASSETTE
RECORDERS
3-2 S-VHS VTR accessories