Specifications

1-1. Colour video cameras
–239–
SURVEILLANCE
PRODUCTS
SSC-DC10P
CCD Colour Video Camera
•Especially designed for surveillance applications •Digitally-
controlled Smart Control function provides intelligent and
flexible automatic backlight compensation •High density 1/3-
inch IT Hyper HAD CCD offers a high resolution of 470 TV
lines and high sensitivity with a minimum illumination of 1.7 lx
(F1.2) •Excellent signal-to-noise ratio of 50 dB •Extra gain
with Turbo AGC function, providing 6 dB more gain than
conventional AGC •Aperture/Sharp Mode makes object
outlines sharper in the reproduced picture •Two alternative
white balance control modes : ATW(Auto Tracing White
Balance) / ATWpro •New ATWpro mode ensures reliable
white balance control based on the absolute colour
temperature of the object (The effective operational colour
range is 2500 K to 6000 K) •Accepts two types of auto iris
lenses (DC servo type/Video servo type) •Accepts C/CS-
mount lenses •External synchronization with VS •Single
cable operation (video/sync/power triple multiplex
transmission) for easy installation with the optional YS-
W150P/W250P Camera Adaptor (Mode A) •Monitor out
function for on-the-spot camera positioning (Mode A) •12 V
DC power supply can also be used (Mode B)
Supplied Accessories: Lens connector (1)
Lens mount cap (1)
Operation manual (1)
Optional accessories: Auto iris lens
VCL-4V8WEA (3.5 mm to 8.0 mm, F1.8)
VCL-S02WEAP (2.8 mm, F1.8)
Specifications
Image device: 1/3-inch Interline Transfer Hyper HAD CCD
Picture elements: 752 (H) × 582 (V)
Sensing area: 4.4 × 3.3 mm
Scanning system: 625 lines, 2:1 interlace
Sync system: Internal or external with VS/VBS* or MPX-VS
* The burst signal is not locked.
Phase control: H phase adjustment (±0.25H)
Horizontal resolution: 470 TV lines
Lens mount: C/CS-mount adjustable
Minimum illumination: AGC ON (TURBO mode)
1.1 lx at F1.2 (30 IRE)
1.7 lx at F1.2 (50 IRE)
10 lx at F1.2 (100 IRE)
Aperture control: SHARP/NORMAL switchable
Enhancer: 3H
Automatic gain control (AGC):
TURBO/NORMAL/OFF switchable
CCD IRIS control: ON/OFF switchable, 1/50 to 1/100000 (seconds)
White balance: ATWpro/ATW switchable
Backlight compensation: Smart Control (BLC ON/OFF switchable)
Signal-to-noise ratio: 50 dB (Weight ON, AGC OFF)
Video out: BNC: 1.0 Vp-p, 75 Ω, sync negative
Operating temperature: –10°C to 50°C (14°F to 122°F)
Storage temperature: –40°C to 60°C (–40°F to 140°F)
Power requirements: 1) Multiplexing with YS-W150P/W250P
2) DC 12 V from DC 12 V power supply
Power consumption: 1) 4.0 W supplied from YS-W150P/W250P
2) 3.0 W at DC 12 V
Mass: 430 g (15 oz)
Auto iris type: DC/VIDEO servo type
Connectors: DC 12 V terminals, LENS (4-pin), Mode A (Triple
multiplexing operation): DC IN/VS IN/VIDEO OUT
(BNC), MONITOR OUT (BNC) Mode B (DC 12 V
operation): VIDEO OUT (BNC), VS IN (BNC)
Dimensions
32 (1
5
/18)
M2x4
49 (1
15
/16)
1
/4" UNC (20pitch)
32 (1
5
/16)
110 (4
3
/8)
70 (2
7
/8)
57 (2
1
/4)9 (
3
/8)
121.2 (4
3
/8)
Unit: mm (inch)
Lens is optional