Specifications

2-4 LCD projectors
–162–
VPL-VW10HT (PAL/NTSC/SECAM/NTSC
4.43
/PAL-M/PAL-N)
LCD Video Projector
•LCD (Liquid Crystal Display)-based projector designed for a
home theatre •Three wide-XGA (1366 x 768 pixels) LCD
panels •200 W UHP lamp •Light output of 1000 ANSI
lumens*
1
(In the “normal” mode, 16:9 aspect) •Superb picture
quality with Digital Reality Creation - Multi Function, 3D
gamma correction and 3D*
2
/3-line YC separation/DNR circuit
•Cinema black mode •Video memory •Through mode for one
to one mapping •Low fan noise •White cabinet •Short
throwing distance •RGB input acceptable •Remote control
unit RM-PJVW10 supplied
Supplied accessories: Remote control unit RM-PJVW10
AA size battery (2)
Air filter
Operating manual
Optional accessories: Projector lamp (for replacement) LMP-P200
Projector suspension support PSS-610
HD D-sub 15-pin to 5 BNC cable SMF-400
Macintosh
®
adaptor ADP-20: Macintosh to VGA
Specifications
Optical
Projection system: 3 LCD panels, 1 lens projection system
LCD panel: 1.35-inch p-Si TFT LCD panel,
3,147,264 pixels (1,049,088 pixels x 3)
Projection lens: 1.2 times zoom lens, F 2.2 to 2.5, f 44.6 to 53.6 mm
Lamp: 200 W UHP
Screen coverage: 40 to 300 inches (16:9, viewable area, measured
diagonally)
Light output: 1000 ANSI lumens*
1
(16:9), 750 ANSI lumens (4:3)
Throwing distance:
<16:9>
40-inch: 1260 to 1470 mm (49
5
⁄8 to 57 inches)
60-inch: 1930 to 2240 mm (76 to 88
1
⁄4 inches)
80-inch: 2600 to 3010 mm (102
3
⁄8 to 118
5
⁄32 inches)
100-inch: 3270 to 3780 mm (128
7
⁄8 to 148
7
⁄8 inches)
120-inch: 3930 to 4550 mm (154
3
⁄4 to 179
1
⁄4 inches)
150-inch: 4940 to 5710 mm (194
5
⁄8 to 224
7
⁄8 inches)
180-inch: 5940 to 6860 mm (234 to 270
1
⁄8 inches)
200-inch: 6610 to 7630 mm (260
3
⁄8 to 300
1
⁄2 inches)
250-inch: 8270 to 9560 mm (325
3
⁄4 to 376
1
⁄2 inches)
300-inch: 9940 to 11480 mm (391
1
⁄2 to 452
1
⁄8 inches)
<4:3>
40-inch: 1560 to 1820 mm (61
1
⁄2 to 71
3
⁄4 inches)
60-inch: 2380 to 2760 mm (93
3
⁄4 to 108
3
⁄4 inches)
80-inch: 3200 to 3700 mm (126 to 145
3
⁄4 inches)
100-inch: 4020 to 4650 mm (158
5
⁄16 to 183
1
⁄8 inches)
120-inch: 4830 to 5590 mm (190
1
⁄4 to 220
1
⁄8 inches)
150-inch: 6060 to 7000 mm (238
5
⁄8 to 275
5
⁄8 inches)
180-inch: 7290 to 8420 mm (287
1
⁄8 to 331
5
⁄8 inches)
200-inch: 8100 to 9360 mm (319 to 368
5
⁄8 inches)
250-inch: 10150 to 11720 mm (399
3
⁄4 to 461
1
⁄2 inches)
300-inch: 12190 to 14070 mm (480 to 554
1
⁄8 inches)
Signals
Colour system: PAL, NTSC, SECAM, NTSC
4.43, PAL-M, PAL-N
(automatically/manually selected)
Resolution: 750 TV lines (video), 1100 TV lines (HD),
1366 x 768 pixels (RGB)
Acceptable signals: DTV (480i, 480p, 720p, 1080i), progressive
component, 15 kHz component 50/60 Hz system,
composite video, Y/C video, RGB (fH: 15 to 91 kHz,
fV: 50 to 85 Hz)
General
Power requirements: AC 100 to 240 V, 50/60 Hz
Power consumption: Max. 300 W, standby 6 W
Heat dissipation: 1023.7 BTU
Dimensions: 395 (W) × 168 (H) × 427 (D) mm
(15
5
⁄8 × 6
5
⁄8 × 16
7
⁄8 inches)
Mass: Approx. 8 kg (17 lb 10 oz)
Operating temperature: 0 to 40 °C (32 to 104 °F)
Operating humidity: 35 to 85%
DISPLAY
PRODUCTS
Inputs/Outputs
VIDEO IN:
Composite: Phono type, 1.0 Vp-p ±2 dB sync negative, 75 Ω
Y/C IN: Mini DIN 4-pin
Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
C: 0.3 Vp-p ±2 dB (PAL), 75 Ω or
Burst 0.286 Vp-p ±2 dB (NTSC), 75 Ω
INPUT A/B:
Component/Progressive:
Phono type
Component/YP
BPR/
Analogue RGB:
G: 0.7 Vp-p ±2 dB positive, 75 Ω
G with sync /Y: 1.0 Vp-p ±2 dB sync negative, 75 Ω
B/CB/P
B: 0.7 Vp-p ±2 dB positive, 75 Ω
R/CR/P
R: 0.7 Vp-p ±2 dB positive, 75 Ω
SYNC/HD:
Composite sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
Horizontal sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
VD:
Vertical sync: 1.0 to 5.0 Vp-p, high impedance positive/negative
CONTROL S IN/
PLUG IN POWER: Stereo mini jack 5.0 Vp-p
Plug in power DC 5 V
TRIGGER: Mini jack
Power on: DC 12 V, output impedance: 4.7 kΩ
Power off: 0 V
REMOTE (RS-232 C): D-sub 9-pin (Female)
Safety regulations
UL, cUL (CSA), FCC Class B, IC Class B,
EN 60 950 (Nemko), CE, C-Tick,
VCCI class B, JEIDA
*1 ANSI lumens is a measuring method of the American National Standards Institute IT 7.228.
*2 This function is only applicable to NTSC signals.