User Manual

28
Connecting a PC (Continued)
Input Signal (for PC Mode)
Select the computer input signal before displaying the PC
image on the LCD TV screen.
NOTE
• Make sure to select the input signal to “1024
××
××
× 768” or
“640
××
××
× 480”, before connecting a PC.
Press MENU to display the Menu screen.
Press \/| to select “Setup”.
Press '/" to select “PC setup”, and press OK.
MenuMenu
[
Setup:PC setup
]
Picture Sound
Setup
Features
CH setup
Clock setup
Display mode
T erminal select
A V2 In/Out
PC setup
Language
Press '/" to select “Input signal”, and press OK.
MenuMenu
[
Setup:PC setup
]
Input signal
Input signal
Fine sync.
Press '/" to select the desired input signal, and press
OK.
MenuMenu
[
Setup:PC setup
]
Input signal
Selected desired item
1 24× 768
64 × 48
0
00
Press MENU to exit.
Fine Sync. Adjustments (for PC Mode)
Adjust the PC image using the “Fine sync.” menu.
Perform steps 1 to 3 in Input Signal (for PC Mode) to
display the “PC setup” screen.
Press '/" to select “Fine sync.”, and press OK.
MenuMenu
[
Setup:PC setup
]
Fine sync.
Input signal
Fine sync.
Press '/" to select the specific adjustment item.
MenuMenu
[
Setup:PC setup
]
Fine sync.
Adjust setting
H– Pos. [ ]– +
V– Pos. [ ]– +
Clock [ ]– +
Phase [ ]– +
Reset
0
0
0
0
Press \/| to adjust the item to your desired position.
Press MENU to exit.
NOTE
• When resetting all adjustment items to factory preset values,
perform the following procedures.
1 Press '/" to select “Reset”, and press OK.
2 Press '/" to select “Yes”, and press OK.
1
2
3
4
5
6
1
2
3
4
5
Selected item
H-Pos.
V-Pos.
Clock
Phase
Description
Centres the image by moving it to the left or right.
Centres the image by moving it up or down.
Adjusts the clock frequency.
Adjusts the clock phase.