User Manual
23
Useful Features (Continued)
1
5
3
4
2
1
2
■ Directly setting the Backlight
You can change the setting of Backlight directly.
Press BACKLIGHT to display the Backlight screen.
Each time you press BACKLIGHT, the mode changes
as follows. You can select the desired mode.
Backlight [Bright]
Backlight [Normal]
Backlight [Auto(OPC)]
Backlight [Dark]
NOTE
• The Backlight screen automatically disappears after 4 seconds.
• See the table left for details of the each backlight setting.
• When set to “Auto (OPC)”, make sure that no object obstructs the
OPC sensor which could affect its ability to sense surrounding light.
Features
The Feature items can be set by the user.
Press MENU to display the Menu screen.
Press \/| to select “Features”.
Press '/" to select the desired adjustment item, and
press OK.
MenuMenu
[
Features
]
Picture
Sound
Setup
Features
Wide mode
Backlight
T imer functions
Auto power off
Power management
Press '/"/\/| to set each item in each setting screen.
(Except “Timer functions” item.)
Example: Backlight setting screen
MenuMenu
[
Features:Backlight
]
Selected desired item
Auto
(
OPC
)
Bright
Normal
Dark
Press MENU to exit.
*
1
Backlight setting can be switched in one touch using the remote
control (see right).
*
2
For details on this setting, see page 29.
NOTE
• For details on setting “Wide mode”, see page 24.
• Select “Timer functions” and press OK to set “Sleep timer” and
“Wake-up timer” (See page 24).
Selected item
Backlight*
1
Auto power
off (only TV
mode)
Power
management*
2
Factory setting
[Bright]
Maximum
brightness
[
Off
] This feature
is inactive.
[Off] No power
management.
Adjustable item/range
[Normal] Brightness 60% → Suitable
for viewing in well-lit areas.
Saves energy.
[Dark]
Brightness 20% → Sufficiently
bright when viewing in dim areas.
[Auto (OPC)]
Screen brightness is
adjusted according to
the ambient light of
the room.
[On] The power of the LCD TV set is
turned off when there is no
signal for 5 minutes.
[On] If no signal inputs for 8 minutes,
the power shuts down.