User Manual

21
Useful Features (Continued)
Display Mode
You can set the orientation of the picture.
Press MENU to display the Menu screen.
Press \/| to select “Setup”.
Press '/" to select “Display mode”, and press OK.
MenuMenu
[
Setup:Display mode
]
Picture Sound
Setup
Features
CH setup
Clock setup
Display mode
Terminal select
AV2 In/Out
PC setup
Language
Press '/" to select the desired mode, and press OK.
MenuMenu
[
Setup:Display mode
]
Selected desired item
Normal
Mirror
Rotate
Upside down
Press MENU to exit.
■ Directly setting the Display mode
Press DIS.MODE to display the Display mode screen.
• Each time you press DIS.MODE, the mode changes as follows.
NOTE
• The Display mode screen automatically disappears after 4 seconds.
• The Display mode is set to “Normal” at the factory setting.
1
2
3
4
5
Terminal Select
You can select the input mode according to the external
device connected to the COMPONENT2/AV1 terminal.
Perform steps 1 and 2 in Display Mode to display the
Setup Menu screen.
Press '/" to select “Terminal select”, and press OK.
MenuMenu
[
Setup:Terminal select
]
PicturePicture Sound Sound
SetupSetup
Features Features
CH setup
Clock setup
Display mode
Terminal select
AV2 In/Out
PC setup
Language
Press '/" to select the desired mode, and press OK.
MenuMenu
[
Setup:Terminal select
]
Selected desired item
COMPONENT2
A V1
Press MENU to exit.
1
4
Display mode [Normal]
Display mode [Mirror]
Display mode [Rotate]Display mode [Upside down]
[Upside down]: To display upside
down images for special uses.
[Rotate]: To display rotated
images for special uses.
[Mirror]: To display mirror
images for special uses.
[Normal]: Normal image
orientation.
2
3
ABC
ABC
ABC
ABC
Selected item
COMPONENT2
AV1
Description
COMPONENT2/AV1 terminals selected as
COMPONENT2 terminals.
COMPONENT2/AV1 terminals selected as AV1
terminals.