User Manual

17
Basic Adjustment Settings (Continued)
Colour Temperature
Adjust the colour temperature to give a better white balance.
Press MENU to display the Menu screen.
Press \/| to select “Picture”.
Press '/" to select “Advanced”, and press OK.
MenuMenu
[
Picture:Advanced
]
Picture Sound Setup Features
Contrast [ 5Contrast [ 5 ] ]
Brightness [
Brightness [ ] – +
Colour [
Colour [ ] – +
T int [ int [ ] ]
Sharpness [
Sharpness [ ] – +
Colour system
Advanced
Reset
0
0
0
0
0
Press '/" to select “Colour temp.”, and press OK.
0
0
0
MenuMenu
[
Picture:Advanced
]
Colour temp.
Colour temp.
Red [ ] – +
Green [ ] – +
Blue [ ] – +
I/P Setup
DNR
Film mode
Quick shoot
Reset
Press '/" to select the desired item, and press OK.
MenuMenu
[
Picture:Advanced
]
Colour temp.
Selected desired item
User
High
Middle
Low
Press MENU to exit.
*When you select “User”, the following items are adjustable.
NOTE
• When resetting “Red”, “Green” and “Blue” to factory preset values,
perform the following procedure.
1 Press '/" to select “Reset” in the “Advanced” menu, and
press OK.
2 Press '/" to select “Yes”, and press OK.
3
2
4
Selected item
User
High
Middle
Low
Description
Can be set your desired colour*
White with Bluish tone
White with Reddish tone
5
6
Selected item
Red
Green
Blue
Press
\\
\\
\ Press
||
||
|
Weaker red Stronger red
Weaker green Stronger green
Weaker blue Stronger blue
I/P Setup
Adjusting the image and input signal can give you a more
beautiful picture.
Perform steps 1 to 3 in Colour Temperature to display
the “Advanced” screen.
Press '/" to select “I/P Setup”, and press OK.
0
0
0
MenuMenu
[
Picture:Advanced
]
I/P Setup
Colour temp.
Red [ ] – +
Green [ ] – +
Blue [ ] – +
I/P Setup
DNR
Film mode
Quick shoot
Reset
Press '/" to select “Interlace” or “Progressive”, and
press OK.
MenuMenu
[
Picture:Advanced
]
I/P Setup
Selected desired item
Interlace
Progressive
Press MENU to exit.
NOTE
• “I/P Setup” cannot be set when 480P, 576P, 720P or 1080Ι signal
or no signal is received from the COMPONENT terminals.
• “I/P Setup” cannot be set when the PC mode is selected as an
input mode.
2
3
4
1
Selected item
Interlace
Progressive
Description
Use this setting when you cannot get a clear
picture with Progressive. (Especially suitable for
media with special effects like game software.)
Normally, you should select this setting.
1