LC-20B4U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No.: Serial No.: [VSA.ONLYI IMPORTANT INFORMATION WARNING: A TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK . . . .
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. I U.S.A. ONLY I CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to pertorm many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY PRECAUTIONS (Continued) • Cleaning-Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Water and moisture-Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. • Stand-Do not place the product on an unstable cart, stand, tripod or table.
IMPORTANT SAFETY PRECAUTIONS (Continued) • If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS Page IMPORTANT INFORMATION ....•.•••.•..•••.•••••••...•.•.•.••...•••....••......•.....•••....•••...•.•.•..••••••.•.•••••......•.•• 1, 2 DEAR SHARP CUSTOMER 3 IMPORTANT SAFETY PRECAUTIONS 3-5 CONTENTS 6 SUPPLIED ACCESSORIES ...............•...................•....••...................•................:..................••.......... 7 PREPARATION 8-10 Using the Remote Control ...•................................••.................................•.•.•.•.••.•.•.•..............•...
SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product.
PREPARATION • Use the remote control by pointing it towards the remote control sensor window on the main unit. Objects between the remote control and sensor window may prevent proper operation. Cautions regarding use of the remote control • Do not expose the remote control to shock. In addition, do not expose the remote control to liquid, and do not place in an area with high humidity. • Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
PREPARATION (Continued) ~ • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. ---. F-type connector 1.
PREPARATION (Continued) CABLE TV (CATV) CONNECTION • A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal. • Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
DISPLAY AND CONTROL OVERVIEW Upper control panel ,----------,..-------,.--------- VOL (- )/( +) CH (V)/(A) MENU TV/VIDEO MAIN POWER To change the vertical angle of the LCD TV set, tilt the screen up to 5 degrees forward or 10 degrees backward. The TV set can also be rotated 25 degrees to right and left. Adjust the angle so that the TV set can be watched most comfortably.
DISPLAY AND CONTROL OVERVIEW (Continued) • Adjusting the screen view angle Terminals Hold the carrying handle and tilt the screen while steadying the stand with your other hand.
DISPLAY AND CONTROL OVERVIEW (Continued) • Before connecting cables and cords to the rear terminals, remove the back covers. Push in the tabs and pull out the back covers carefully. • To mount the cover, insert the 2 hooks on the bottom of the cover into the cabinet and press on the upper part of the back cover until the tab locks in place with a click. • Plug the headphone mini-plug into the HEADPHONE jack located on the rear of the TV set. • On-screen display .....
REMOTE CONTROL 1 POWER (p. 21) 1 2 3 4 Switch the Liquid Crystal Television power on or off. 10 2 DISPLAY Display the channel and time information. 11 3 SLEEP (p. 26) Set the sleep timer. 5 12 4 ENTER 6 7 13 14 5 BRIGHT (p. 27) Execute a command. Adjust the brightness of the screen. 6 MUTE (p. 23) 8 Mute the sound. 15 9 7 VOL (+)/(-) (p. 23) Set the volume. 8 CH (A)/(V) (p. 24) Select channel. 9 MTS (p. 23) Select audio settings. 10 PIC. FLIP (p. 28) Set the orientation of the picture.
EZ SETUP (WITH AUTO CLOCK SETTING) Control section of main unit • When you turn on the TV for the first time, it will automatically memorize the broadcasting channels and clock. Please perform the following instructions before you press MAIN POWER. (1) Insert the batteries into the remote control. (See page 8.) (2) Connect the antenna cable to the TV set. (See page 9.) (3) Connect the AC adapter to the POWER INPUT terminal of the product and plug in the AC cord to the wall outlet. (See page 10.
EZ SETUP (WITH AUTO CLOCK SETTING) (Continued) 6 Press.1 ~ to select YES, and press ENTER. If you want to stop the EZ SETUP process once it has started, press ~ and it will be canceled. If you want to SET UP again, please refer to pages 33 and 34 on SET UP. To cancel EZ SETUP Press CONNECT ANTENNA OR CABLE. START EZ SETUP? IlJ YES NO SELECT:~ ENTER:. EXIT:. ~. ~············""""'~-MENU The tuner will automatically search for the broadcasting and cable TV channels. (The CH No.
SETTING THE CLOCK There are two methods of setting the clock: AUTO CLOCK and MANUAL CLOCK. AUTO CLOCK uses EDS signals, which are provided by some TV stations, to automatically adjust the clock. MANUAL CLOCK set the clock manually in areas where no channel carries EDS signals. 1 Press MENU to display the MENU screen. MENU t> ~SLEEP TIMER ~V IDEO ADJUST t> t> ~PRESET ~CLOSED CAPTI ONt> rmV-CHIP BLOCK UP [l1~SET 2 Press ./T to move the cursor to SET UP, and press ENTER. SELECT:O ENTER:. EXIT:.
SETTING THE CLOCK (Continued) 5 Press ..... /~ to select AUTO or MANUAL. 6 Press ./T to move the cursor to START, and press ENTER. AUTO CLOCK eRETURN In' EDS CH SET [AUTO [---] EDS CH START ADJUST:@ ENTER:. EXIT: • PLEASE WAIT NOW SEARCH ING TIME • • I NOTE > If you do not know the channel that carries EDS signals in your area, select EDS CH SET to AUTO and select START. If you know the channel of the EDS signal carrier in your area, select EDS CH SET to MANUAL. Set the EDS CH and select START.
SETTING THE CLOCK (Continued) If there are no channels with EDS signals, set the clock manually using MANUAL CLOCK. 1 2 Press MENU to display the MENU screen. Press ./'Y to move the cursor to SET UP, and press ENTER. MENU ~SLEEP TIMER ~V I DEO ADJUST ~PRESET ~CLOSED CAPT IONI> rmV-CHIP BLOCK I> IrrIaSET UP I> SELECT:G 3 Press ./'Y to move the cursor to CLOCK, and press ENTER. Press ./'Y to move the cursor to MANUAL CLOCK, and press ENTER. 5 Press ./'Y to move the cursor to TIME, and press ENTER.
BASIC OPERATION This product is factory set to comply with the TV broadcasting system in the United States. For Brazil, Argentina and Uruguay, set the color system according to the country before using this product by following the table below. TV broadcasting system Country Factory setting of color system User setting TV Video TVIVideo U.S.A.
BASIC OPERATION (Continued) Control section of main unit 1 MAIN POWER t-(f:D -OO~~ a:::D-vo<", 2 Press MAIN POWER, located on the upper side of the main unit, to on. .. On-screen display 2 The POWER indicator instantaneously changes from red to green and the main unit turns on. I NOTE > • The On-screen indicator disappears after a few seconds. POWER indicator To turn off the LCD TV Press POWER on the remote control. The POWER indicator turns red. To turn the LCD TV back on Press POWER again.
BASIC OPERATION (Continued) 1 2 Turn on the power of the connected video equipment. AV1 mode AV1 Press TV/VIDEO and select the applicable input source. The screen displays AV1 , AV2, COMPONENT or TV mode each time TV/VIDEO is pressed. I NOTE > • The AV input mode indication remains for 3 seconds. AV2 mode • AV1: Video equipment connected to the .-----------A-V-2---, AV-IN1 input terminals. The S-video input terminal is additionally provided for the AVIN1 input.
BASIC OPERATION (Continued) POWER 1 Press VOL (+) to increase the sound volume. The bar indicator shifts right. VOLUME 2 50 11111111111111111111111111"'" Press VOL (-) to decrease the sound volume. The bar indicator shifts left. VOLUME 10 111111·"""""""""""" To mute the sound !jillIllLVOL (+)/{-) 1 Press MUTE to temporarily turn off the sound. is displayed for The MUTE mark 4 seconds. I D* 2 D~ Press MUTE or VOL (+)/{-) to turn the sound back to the previous level.
BASIC OPERATION (Continued) Changing channels by using Channel Select on the remote control • This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2or 3-digit number. To select a 1- or 2-digit channel number (e.g., Channel 5): Complete the following procedure within 4 seconds. 1 Press the ® button. 2 Press the ® button. I NOTE 05 > • When selecting a 1-digit channel number, do not fail to press the ® button first. To select a 3-digit channel number (e.
SELECTING MENU ITEMS • This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired menu item by following the steps below and then refer to the indicated page for details. 1 2 3 (Page 26) Press MENU to display the MENU screen. Press ~JT to select the desired menu item, and press ENTER. SLEEP TIMER 8RETURN IU' SLEEP TIMER [--- REMAIN] - Press MENU to exit. SELECT:O ENTER:. EXIT:.
ADJUSTMENTS You can set the SLEEP TIMER to automatically turn off the TV. Directly setting the SLEEP TIMER 1 Press SLEEP to display the SLEEP TIMER screen. 2 Press SLEEP to set the sleep timer (in minutes). - -....... 30 ----.1 60 I --- REMAIN 120+01- - - - - - - 9 0 (minutes) The SLEEP TIMER is turned off when --- is displayed. I NOTE > • The SLEEP TIMER screen automatically disappears in 3 seconds.
ADJUSTMENTS (Continued) You can adjust the brightness of the screen. Directly setting the BRIGHTNESS 1 Press BRIGHT to display the BRIGHTNESS screen. 2 Press BRIGHT to change the setting. I NOTE BRIGHT > BR IGHTNESS [BR IGHT] • The BRIGHTNESS screen automatically disappears in 3 seconds. • [BRIGHT]: maximum brightness [NORMAL]: 60% brightness (Suitable for viewing in a well-lit area. Saves energy.) [DARK]: 10% brightness (Sufficiently bright when viewing in dim areas.
ADJUSTMENTS (Continued) You can set the orientation of the picture. Directly setting the PICTURE FLIP 1 Press PIC. FLIP to display the PICTURE FLIP screen. 2 Press PIC. FLIP to change the setting. PIC. FLIP ABC 1+ • PICTURE fliP [NORMAL] NORMAL UPSrJr~g~NE-E R_O_TA_r_E_~---, C I NOTE > • The PICTURE FLIP screen automatically disappears in 3 seconds.
ADJUSTMENTS (Continued) 1 Press MENU to display the MENU screen. 2 Press £./T to move the cursor to PRESET, and press ENTER. MENU fj!SLEEP TIMER ~V IDEO ADJUST [lJ~PRESET ~CLOSED CAPTlON~ rmV-CHIP BLOCK ~ ~SET UP ~ SELECT:~ MENU 3 Press £./T to move the cursor to the desired item, and press ENTER. 4 Press ~/~ to change the setting, and press ENTER. 5 Press MENU to return to the main screen.
ADJUSTMENTS (Continued) The language for the On-Screen Display can be ENGLISH, SPANISH or FRENCH. 1 Press MENU to display the MENU screen. MENU IO'IjISLEEP TIMER ~V IDEO ADJUST ~PRESET ~CLOSED ~ CAPT I ON~ rmV-CHIP BLOCK ~ ~SET UP ~ SELECT:G 2 Press ./T to move the cursor to SET UP, and press ENTER. Press ./T to move the cursor to LANGUAGE, and press ENTER. ~ ~ ~ ~CLOSED CAPTION~ lUIV-CHIP BLOCK ~ IO'~SET UP ~ Press ~.lT to select the language, and press ENTER. ENTER:. EXIT:.
ADJUSTMENTS (Continued) Video adjustments have different selection items depending on TV mode or AV mode (signal from an external device). (See page 32.) 1 Press MENU to display the MENU screen. MENU [U'~SLEEP TIMER ~V IDEO ADJUST ~PRESET I> ~CLOSED CAPT IONI> IDlV-CHIP BLOCK ~SET UP SELECT:O 2 Press .. /~ to move the cursor to VIDEO ADJUST, and press ENTER. I> I> ENTER:. EXIT:.
ADJUSTMENTS (Continued) TV mode ~ I -..+ m TINT Toward purple COLOR Lower color intensity BLACK LEVEL Less brightness ~ -.. More brightness SHARPNESS Soft picture ~ -.. Sharp picture RED-BLUE Stronger red ~ -.. m Stronger blue GREEN Weaker green -.. Stronger green COLOR SYSTEM C -..+ Toward green N358 ~ PAL-M ~ Toward green Higher color intensity I - ~ ~ + + + + PAL-N:J AV/COMPONENT mode I TINT Toward purple COLOR Lower color intensity ~ -..
ADJUSTMENTS (Continued) • EZ SETUP When you move to an area with different broadcasting signals, the set will automatically memorize the channel number and time. Refer to pages 15 and 16 for more information on EZ SETUP. • SETTING THE AIR/CABLE It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV programs. 1 2 Switch the screen to TV mode and press MENU to Display the MENU screen. Press ..IT to move the cursor to SET UP, and press ENTER.
ADJUSTMENTS (Continued) Saving broadcast TV channels in the memory 1 Press MENU to display the MENU screen, press ./T to move the cursor to SET UP, and press ENTER. 2 Press ./T to move the cursor to CH-SETTING, and press ENTER. 3 Press ./T to move the cursor to CH SEARCH, and press ENTER. 4 Press ~. The tuner will search through all available channels in your area and add them to the TV memory.
ADJUSTMENTS (Continued) • BLUE SCREEN Automatically turns the screen blue if no broadcast signal is received. 1 Press MENU to display the MENU screen. 2 Press .r'f to move the cursor to SET UP, and press ENTER. MENU ~SLEEP TIMER ~VIDEO ADJUST ~PRESET ~ ~CLOSED CAPT I ON~ IDIV-CHIP BLOCK ~ IO'~SET UP ~ SELECT:~ 3 Press ./"'f to move the cursor to BLUE SCREEN, and press ENTER. Press ~/~ to select ON or OFF, and press ENTER. S Press MENU to return to the main screen. > ENTER:. EXIT:.
ADJUSTMENTS (Continued) • SETTING CLOSED CAPTION This TV set is equipped with an internal Closed Caption decoder. "Closed Caption" is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen (see the illustration). Not all programs and videos will offer closed captioning. Please look for the "~" symbol to ensure that captions will be shown. The Closed Caption broadcasts can be viewed in two modes: CAPTION and TEXT.
ADJUSTMENTS (Continued) • V-CHIP • This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful. • Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and content.
ADJUSTMENTS (Continued) [2] TV PARENTAL GUIDELINES ¢:::: content based V (Violence) S (Sexual Situation) L (Adult Language) D (Sexually Suggestive Dialog) TV-V (All children) [&J [&J [&J [&J [&J TV-V7 (Direct to Older Children) X [&J ~ [&J [&J [g] ~ [g] [g] X X X X TV-14 (Parents Strongly Cautioned) X X X X TV-MA (Mature Audience Only) X X X RATING 11 TV-G (General Audience) age based TV-PG (Parental Guidance Suggested) JJ ==> FV (Fantasy Violence) IX!: The content ra
ADJUSTMENTS (Continued) • SETTING V-CHIP [1] MPAA RATING 1 Press MENU to display the MENU screen. 2 Press J..I" to move the cursor to V-CHIP BLOCK, and press ENTER. 3 INPUT SECRET NO. will be displayed. Input the 4-digit secret number by using Channel Select, and press ENTER. I NOTE MENU [Us~SLEEP TIMER ~VIDEO ADJUST ~PRESET ~CLOSED CAPT I ON~ WlV-CHIP BLOCK ~ ~SET UP ~ MENU ~SLEEP TIMER ~VIDEO ADJUST ~PRESET ~ ~CLOSED CAPT I ON~ [UsWlV-CH IP BLOCK ~ ~SET UP ~ INPUT SECRET NO.
ADJUSTMENTS (Continued) [2] TV GUIDELINES • Setting TV GUIDELINES 1 Repeat steps 1 to 3 of [1] MPAA RATING. (See page 39.) 2 Press £./T to move the cursor to TV GUIDELINES, and press ENTER. V-CHIP BLOCK 8RETURN MPAA I> I1J TV GU IDEL INESI> STATUS [OFF] SELECT:G 3 Press £./T to move the cursor to TV-V?, and press ENTER. ENTER:. EXIT:. TV GUIDELINES 8RETURN TV-Y [ -----] I1J TV-Y7 [-----] TV-G [-----] TV-PG [-----] TV-14 [-----] TV-MA [-----] BLOCK CONTENTI> [ SELECT:~ 4 5 Press ......
ADJUSTMENTS (Continued) • Setting BLOCK CONTENT 1 Repeat steps 1 to 3 of [1] MPAA RATING. (See page 39.) V-CH IP BLOCK 8RETURN MPAA l> [U' TV GUIDELINESl> STATUS [OFF] 2 Press ./T to move the cursor to TV GUIDELINES, and press ENTER. SELECT:O 3 MENU Press ./T to move the cursor to BLOCK CONTENT, and press ENTER. BLOCK CONTENTl> [ SELECT:O Press ./T to move the cursor to the desired item, and press ENTER. EXIT:.
ADJUSTMENTS (Continued) [3] ACTIVATING V-CHIP BLOCK • Setting STATUS You can activate V-CHIP BLOCK after setting [1] MPAA RATING andl or [2] TV GUIDELINES. 1 Repeat steps 1 to 3 of [1] MPAA RATING. (See page 39.) 2 Press ./T to move the cursor to STATUS, and press ENTER. V-CH IP BLOCK eRETURN MPAA I> TV GUIDELINESI> ID STATUS [OFF] SELECT:~ 3 Press ..... /~ to set STATUS to ON, and press ENTER. I NOTE > ENTER:. EXIT:.
ADJUSTMENTS (Continued) [5] CHANGING V-CHIP BLOCK SETTINGS 1 Repeat steps 1 to 2 of [1] MPAA RATING, then INPUT SECRET NO. will be displayed. INPUT SECRET NO. 2 Input the 4-digit secret number by using Channel Select; the VCHIP select mode will be displayed. Set V-CHIP BLOCK again. INPUT SECRET NO. EXIT:. [6] CHANGING OR CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number as follows.
CONNECTING EXTERNAL DEVICES You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the TV set. When connecting an external device, turn off the power of the main unit first to prevent any possible damage.
CONNECTING EXTERNAL DEVICES (Continued) I Connecting a VCR, DVD player or a video camera (AV-IN1/2/COMPONENT) Video VCR v [3~E -::--------, Audio (L) DVD Player Camcorder L--_~ I NOTE > EO)Imr=====:IIIIJ!I]g S-video • VCR • If your VCR (or other external devices) has an S-video terminal, S-VIDEO connection is recommended. (Use an S-video cable.
CONNECTING EXTERNAL DEVICES (Continued) I Outputting video and audio (video output) I You can output video and audio signals from the TV set through the AV output terminals (AV-OUT). • When using AV2 as an output terminal, select PRESET in the MENU and set AV2 IN/OUT to OUT. (See page 29.) • The factory setting for AV2 IN/OUT is IN. Connect to a VCR, audio amplifier, etc. I NOTE > • AV2 IN/OUT has 2 OUT modes (see page 29).
TROUBLESHOOTING • Before calling for repair services, make the following checks for possible remedies to the encountered symptoms. I TV set I Problem - - - - -. - - . IB --------------------------------------------... --- -----------_ ... _-_--_ .. _---------_ _-... ----- --------- ----------------------------... ------- -- --_ ... ---------- --_ ... ---- -- ----- -------..... __.. ------------------.. __ _ _--- ... ~----- ... ... _ ...... _ ... _ .... _ M_ ~ ... ", . . .,., .... _ _ '" _ _ _ ...
TROUBLESHOOTING (Continued) I Antenna Problem The picture is not sharp. Check item • • • • The reception may be weak. The quality of the broadcast may also be bad. Make sure the antenna is facing the right direction. Make sure the outside antenna is connected. The picture moves. The picture is doubled or tripled. The picture is spotted. There are stripes on the screen or colors fade. • Make sure the antenna is facing the right direction.
SPECIFICATIONS ~I It LCD panel Number of dots Video color systems Destination TV Standard (CCIR) TV function TV Tuning System STEREO CATV Y/C FILTER Brightness Lamp life (Fluorescent lamp) Viewing angles Audio amplifier Speakers AV-IN1 Terminals AV-IN2 COMPONENT Antenna Headphone OSD language Power supply Weight Accessories LC-20B4U 19.7" Advanced Super View & BLACK TFT LCD 921,600 dots VGA N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60 USA/Latin America/Taiwan NTSC/PAL-M/PAL-N PLL 181 ch. MTS+SAP 125 ch.
DIMENSIONAL DRAWINGS Unit: inch (mm) I 1617132 (420) 24 51 /64 (630) I I ------------1-------I 00 ~ I 4 23/64 (110.7) 3(76.1) ~ M 0 J'.. ~ '=:t ~ C') co ,... 8 ~ 9 53/64 (249.
CALLING FOR SERVICE For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
V.lllllll;_ID.I.N.C.AN_A.D.A.O.N.L.Y .. ·SHAR~ LIMITED WARRANTY Consumer Electronics Products Congratulations on your purchase! Sharp Electronics of Canada Ltd.
SHAR~ IMPORTANTI Please fill oul and relurn wi1hin lhe oexl10 days. This is your Sharp Product Registration Card. Proper registration can serve as proof of purchase in the event your original receipt becomes misplaced or lost. Returning this card will not affect warranty coverage, but may expedite the processing of warranty claims. The additional information will also help us to develop new products that best meet your needs and desires. AQUaS™ 1. 1.0 Mr. Register ONLINE at www.sharpusa.com/ 4.
Please fold here. 21. Which of the fallowing do you plan to do within the next 6 or 12 months? 1-6 Months __ ._---_ .. __ .. _----_ .. 0 Get Married. ......... __ .... [ ] Have a Baby. Buya House ........ 0 [l Remodel a Home. Move to a New Residence ... 0 Buya Personal Computer. ..................... [] Buy/Lease a New Vehicle .. 0 Buy/Lease a Used Vehicle ...................... LI 22. 23. 7-12 Months 1. 2. 3. 4 5. 6. 7. 8. [] Ot U 02. II 03. 0 04 0 OS. 0 06. ::::J 07. D 0 [1 0 0 LI n 08. 09.
PRODUCT REGISTRATION DEPARTMENT Please do not send any products or other correspondence to this address. If you have comments or suggestions about our product, please write to: SHARP ELECTRONIC CORPORATION TV Marketing Department Sharp Plaza, Mahwah, NJ 07430·2135 U.S.A. Visit our website at hOp://WWW.sharpusa.com/ PEQ01-0l SHAR~ PO BOX 173125 DENVER CO 80217-3125 11 •• 1.11.11 •• 1.111.111 ••• 11111.11.11111.1.1.
