User Manual
3
To use your LCD TV set, perform steps below.
Check the supplied accessories. (See page 1.)
Insert two “AAA” size batteries into the remote control. (See page 4.)
• Op en the battery cover, and then insert batteries with their terminals corresponding to the (+) and (–) indications in the battery
compartment.
Open the terminal cover. (See page 5.)
• Pull down the hook located on the upper side of terminal cover to open the cover.
Connect the antenna cable. (See page 5.)
Connect with external devices. (See page 9.)
AV1 IN Terminal (COMPONENT)
Terminal for component connection.
AV3 IN/OUT Terminal
Terminal for INPUT/OUTPUT connection.
AV2 IN Terminal
Terminal for S-video connection.
Connect the AC cord to the AC INPUT terminal of the LCD TV set and plug in the AC cord to the power outlet.
(See page 5.)
Turn on the main power. (See page 10.)
1
Press POWER on the upper side of the main unit.
2
The POWER indicator located on the front of the main unit changes from red to green.
POWER
POWER indicator
Start Preset settings. (See page 12.)
Before Using the LCD TV Set
1
8
6
3
2
4
5
7
LC-20B10NE.indb3LC-20B10NE.indb3 2006/02/0316:09:452006/02/0316:09:45