User Manual
26
ITEMS
MODEL
LC-20B10N
LCD panel 20" (50 cm) Advanced Super View & BLACK TFT LCD
Number of pixels 921,600 dots VGA
Video colour systems World multi system
TV function
TV Standard (CCIR) PAL: B/G, I, D/K NTSC:M SECAM: B/G, D/K PAL-60
TV Tuning System Auto preset tuning
STEREO/BILINGUAL NICAM-B/G, I, D/K A2 stereo-B/G
AUTO PRESET Yes
CATV S1~S41 ch. Hyper Band
4-LINE DIGITAL COMB FILTER Yes
Brightness 430 cd/m
2
Lamp life 60,000 hours*
Viewing angles H: 170° V: 170°
Audio output 3 W × 2 STEREO SURROUND SOUND
Speakers 4 × 11 cm, 2 pcs.
Terminals
AV1 IN AUDIO-IN, COMPONENT-IN
AV2 IN AUDIO-IN, VIDEO-IN, S-VIDEO-IN
AV3 IN/OUT AUDIO-IN, VIDEO-IN/AUDIO-OUT, VIDEO-OUT
Antenna DIN-Type
Headphone jack 3.5 mm ø jack (Front)
OSD LANGUAGE English/Chinese/Arabic/Malay
Power requirement AC 110-240 V, 50/60 Hz
Power Consumption 64 W (0.7 W at Standby)
Weight
Display only 6.4 kg
Display with stand
7.4 kg
Operating temperature 0°C to +40°C
* The typical period of time after which the lamp's power output will have decreased by about half, given that the AQUOS is used
continuously in a 25°C room under standard lighting and brightness conditions.
■
As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for the LCD TV set
improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
Troubleshooting (Continued)
Specifi cations
Problem Check item
The picture is
not sharp.
• The reception may be weak.
• The state of the broadcast may also be bad.
• Make sure the antenna is facing the correct direction.
• Make sure the outside antenna has not been disconnected.
The picture
moves.
The picture
is doubled or
tripled.
• Make sure the antenna is facing the correct direction.
• Broadcast waves may be refl ected from adjacent mountains or buildings.
The picture is
spotted.
• There may be interference from automobiles, trains, high-voltage lines, neon lights, etc.
• There may be interference between the antenna cable and power cable. Try positioning
them further apart.
There are stripes
on the screen or
colours fade.
• Is the unit receiving interference from other devices?
Transmission antennas of radio broadcasting stations and transmission antennas of
amateur radios and cellular phones may also cause interference.
• Use the unit as far apart as possible from devices that may cause possible interference.
Antenna
LC-20B10NE.indb26LC-20B10NE.indb26 2006/02/0316:10:062006/02/0316:10:06