User Manual

13
Preset (Continued)
Presetting the Channels (MANUAL)
■
Setting a channel to a desired TV station
Upper control panel
4 1, 2, 63
Press MENU (PRESET-
1
) on the upper part of the
LCD TV set for more than 2 seconds to display the
AUTO mode screen.
$872

%*

9+)
0+]
Press MENU (PRESET-
1
) to display the MANUAL
mode screen.
• Press MENU (PRESET-
1
) again to change the MANUAL
mode as shown below.
AUTO MANUAL LANGUAGE NORMAL SCREEN
Select the channel position using Channel Select or
CH (
)/( ).
0$18$/

%*

9+)
0+]
Press VOL (–)/(+) (PRESET-
2
) to locate the channel
you want to preset to the position. Search is initiated
and when a TV signal is received during the search,
the search stops.
Repeat steps 3 and 4 above, to preset the channel
posi tions for other broad casts, etc.
0$18$/

%*

8+)
0+]
Press MENU (PRESET-
1
) twice to return to the
normal screen.
NOTE
•
System may not have been set correctly, if noise can be heard or
if there is no sound. In such a case, adjust “SOUND SYSTEM”.
(See page 14.)
■
In a weak reception area or under bad reception
conditions
Upper control panel
4 1, 2, 3, 5
Press MENU (PRESET-
1
) on the upper part of the
LCD TV set for more than 2 seconds to display the
AUTO mode screen.
Press MENU (PRESET-
1
) to display the MANUAL
mode screen.
While the MANUAL mode screen is displayed, press
MENU (PRESET-
1
) for more than 2 seconds.
The channel position number remains in green.
Adjust for good reception using VOL (–)/(+)
(PRESET-
2
).
After fi nishing the adjustment, press MENU
(PRESET-
1
) to continue channel presetting.
NOTE
•
While the MANUAL mode screen is displayed, press MENU
(PRESET-
1
).
(The LANGUAGE mode screen will appear.)
0$18$/

%*

9+)
0+]
),1(
8+)
0+]
Press MENU for more than
2 seconds.
(1*/,6+
( 1 * / , 6 +
%$+$6$0(/$<8
% $ + $ 6 $  0 ( / $ < 8
1
1
2
2
3
4
5
6
5
3
Sound System
4
LC20B10NEP10-18.indd13LC20B10NEP10-18.indd13 2006/02/229:53:232006/02/229:53:23