User Manual

12
On-Screen Display Language Selection
MENU on the LCD TV set can also be used to select the
language.
Upper control panel
3 1, 2 4
Press MENU (PRESET-
1
) on the upper part of the
LCD TV set for more than 2 seconds to display the
PRESET mode screen.
$872

%*

9+)
0+]
Press MENU (PRESET-
1
) twice to display the
LANGUAGE select mode screen.
• Press MENU (PRESET-
1
) again to change the PRESET
mode as shown below.
AUTO MANUAL LANGUAGE NORMAL SCREEN
NOTE
•
You can also set the language by selecting “LANGUAGE” in
“SETUP” in the Menu screen. (See page 20.)
(1*/,6+
( 1 * / , 6 +
%$+$6$0(/$<8
% $ + $ 6 $  0 ( / $ < 8
Press CH ( )/( ) to select the language you wish to
display.
Press TV/VIDEO to return to the normal screen.
Preset
1
2
3
4
Presetting the Channels (AUTO)
Automatically tunes in and presets receivable TV stations.
Make sure the antenna cable is properly connected.
Upper control panel
21
Press MENU (PRESET-
1
) on the upper part of the
LCD TV set for more than 2 seconds to display the
AUTO mode screen.
$872

%*

9+)
0+]
NOTE
•
When starting PRESET after setting “SOUND SYSTEM” with
MENU on the remote control, “SOUND SYSTEM” for all
channels are stored into memory.
Press VOL (–)/(+) (PRESET-
2
) on the upper part of
the LCD TV set. All the TV stations in your area that
can be received by the LCD TV set are automatically
preset.
The screen shows whatever is on channel 1 when full
auto channel preset is fi nished.

3$/
%*
NOTE
•
Unused channels are automatically skipped.
•
The Preset mode is only available in the TV mode.
•
Instead of pressing MENU for more than 2 seconds, you can set
the channel by selecting “CH SETUP” in “SETUP” in the Menu
screen. (See page 14.)
1
2
3
Sound System
LC20B10NEP10-18.indd12LC20B10NEP10-18.indd12 2006/02/0711:58:102006/02/0711:58:10