User Manual

14
Your television has an Automatic Search System which makes tuning in your television easy. This
Automatic Search System scans the entire reception range in your area and automatically stores all
available channels of suitable signal strength in the correct order e.g. BBC1 will tune into channel 1,
BBC2 will tune into channel 2, etc.
THE AUTOMATIC SEARCH PROCESS WILL ONLY START BY ITSELF THE FIRST TIME YOU
SWITCH THE SET ON.
HOWEVER YOU CAN RESTART THIS PROCESS VIA THE MENU SYSTEM.
1. Press
(Power) on the top of the unit or press (Power) on the remote.
Language select menu will appear first.
2. Press or to select desired language.
Then press OK.
3. Press OK to start automatic tuning.
Your TV will now automatically tune in all available channels.
When the programme on the screen stops changing and the sound comes on, the search process is
complete.
Note:
If you use a loop aerial, weak channels may not be stored automatically. You will need to tune these
manually.
LANGUAGE
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
ESPANOL
: SELECT
OK : SET : EXITMENU
   
   
  
  
Automatic Search System
AUTOMATIC SEARCH
MENU : EXIT