User Manual

18
Changing Channels
You can select channels using Channel Select or CH (
)/( ).
Note:
• You can also use CH ( )/( ) on the TV main unit for this operation.
To select a one-digit channel
(e.g. Channel 5):
Hold down the button.
To select a two/three-digit channel
(e.g. Channel 15):
Press the
button.
Hold down the button.
• To handle the increasing number of channels available, this LCD TV set allows you
to select up to 200 channels (0 to 199).
Using CH ( )/( )
Press CH (
) and the channels change in the order shown below:
1 → 2 → 3 → . . . → 198 → 199 → 0 → 1 → 2 → 3 → . . .
Press CH (
) and the channels change in the order shown below:
3 → 2 → 1 → 0 → 199 → 198 → . . . → 3 → 2 → 1 → . . .
15
1
Channel
Select
5
CH
(
)/( )
Sound Volume
Basic Operation (Continued)
To adjust the volume
|
Press Volume (+) to increase the sound
volume. The numerical value increases.
|
Press Volume (–) to decrease the sound
volume. The numerical value decreases.
Note:
• You can also use Volume (+)/(–) of the TV main
unit for this operation.
To mute the sound
|
Press Mute to temporarily turn off the
sound. “Sound off” is displayed.
|
Press Mute again to turn off the Mute
function. “Sound on” is displayed.
Note:
• When Volume (+)/(–) is pressed in the Mute
mode, the sound turns on and the volume
indicator is displayed.
• The Mute function is cancelled when is
pressed.
Volume
(+)/(–)
Mute
Sound off
Sound on
Volume
50
Volume
10
Using Channel Select
When selecting the channel using Channel Select, finish inputting the channel
number by holding down the button for the last digit for a moment.
1
2
1
Note:
Note:
• Channel “0” is assigned for RF output of VCR.
CH
MENU
E
TV/VIDEO
REVEAL
HOLD
END
M
MENUSOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
WIDE
T
CH
E
TV/VIDEO
REVEAL
HOLD
END
MENUSOUND
SUBTITLE
SUBPAGE
TEXT
ROTATE
BRIGHT
T
M
T
OK