Manual

BASIC OPERATION (Continued)
Changing channels by using Channel Select on the remote control
• This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2-
or 3-digit number.
_CH
__ Channel
Select
W
To select a 1- or 2-digit channel
number (e.g., Channel 5):
Complete the following procedure
within 4 seconds.
1 Press the @ button.
2 Press the @ button.
• When selecting a 1-digit channel number,
do not fail to press the (_ button first.
°-I
115
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following procedure
within 4 seconds.
1 Press the _ button.
2 Press the (3_ button.
3 Press the @ button.
• The 3-digit channel number can be
selected only when the receiving mode is
set to CABLE in CH-SETTING, (For details
on setting the receiving mode, see page
27.)
Changing channels with OH (_)/(v) on the remote control
Air Press CH (A) and the channels change in the order shown below:
2--> 3-_... -e 68 -->69 -e 2-e 3 =e...
Press CH (v) and the channels change in the order shown below:
3->2-->69-->68->...->3-->2->...
Cable Press CH (A) and the channels change in the order shown below:
1 =e2-e 3-e...-e 125-el -->2-->3-->...
Press CH (v) and the channels change in the order shown below:
3-->2-->1 -->125-->...-->3-->2-->1 -e...
m