Manual

EZ SETUP
MAIN POWER
I
NU/
2
3
4
• When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before you press MAIN
POWER.
(1) Insert the batteries into the remote control. (See page 8.)
(2) Connect the antenna cable to the TV set. (See page 10.)
(3) Connect the AC adapter to the DC input terminal of the product
and plug in the AC cord to the wall outlet. (See page 9.)
Press MAIN POWER, located on
the upper side of the main unit, to
turn on the TV. The SELECT
LANGUAGE mode will be dis-
played.
Press _/_' to select "ENGLISH",
"ESPANOL (SPANISH)" or
"FRANCAIS (FRENCH)".
Press _1/1_ to access EZ SETUP
mode.
SELECTLANGUAGE
ENGLISH
ESPANOL
ERANCAIS
SELECT:@ ENTER:@ EXIT:_
Press I_.
The tuner will automatically search
for the broadcasting and cable TV
channels. (The CH No. will
automatically increase when it
appears.)
If you want to stop the EZ SETUP
process once it has started, press
_1 and it will be canceled. If you
want to SET UP again, please refer
to pages 27 and 28 on SET UP.
CONNECTANTENNAOR CABLE,
STARTEZ SETUP?
YES:@ UO:@ EXIT:_
PLEASEWAiT
AUTOPROGRA_ING
To cancel EZ SETUP
Press _1.
STOP:@
2
5 Once EZ SETUP is completed, the
lowest channel number memorized
will be displayed.
• Do not let the EZ SETUP screen display unattended for e longtime.
• If EZ SETUP does not memorize all the channels inyour region, please refer to pages 27 and 28 for more
informationon manually memorizing the channels using CHANNEL SETTING.
• It may be difficult to PRESET when the broadcasting signals ere weak, the channel cycle frequency is incorrector
the frequency jamming is occurring around the area. Please refer to pages 27 and 28 for more information on
manually memorizing channels using CHANNEL SETTING.
m