ENGLISH OPERATION MANUAL MODE D’EMPLOI MANUAL DE MANEJO MANUAL DE OPERAÇÃO POWER SLEEP PORTUGUÊS LIQUID CRYSTAL TELEVISION TÉLÉVISEUR ACL TELEVISOR CON PANTALLA DE CRISTAL LIQUIDO TELEVISOR DE CRISTAL LÍQUIDO ESPAÑOL FRANÇAIS LC-15B1U U EN M
ENGLISH LC-15B1U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT INFORMATION WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. U.S.A. ONLY CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. ■ Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. ■ Stand—Do not place the product on an unstable cart, stand, tripod or table.
IMPORTANT SAFETY PRECAUTIONS (Continued) ■ If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges.
CONTENTS Page DEAR SHARP CUSTOMER ............................................................................................................. 3 IMPORTANT SAFETY PRECAUTIONS ....................................................................................... 3-5 SUPPLIED ACCESSORIES ............................................................................................................. 7 PREPARATION ....................................................................................................
SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product.
PREPARATION Using the Remote Control ■ Use the remote control by pointing it towards the remote sensor window. Objects between the remote control and sensor window may prevent proper operation. Cautions regarding use of remote control ■ Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. ■ Do not install or place the remote control under direct sunlight. The heat may cause deformation of the unit.
PREPARATION (Continued) Power Connection CH MENU TV/VIDE O MAIN POWER VOL Household power outlet Plug into AC outlet. AC adapter AC cord To DC input terminal (DC 12V) Note ● ● ● Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet. Always turn the main POWER switch of the LCD TV set to off when connecting the AC adapter. Always unplug the AC adapter from the product and power outlet when not using for a long period of time.
PREPARATION (Continued) Antenna Connection (Continued) ANTENNAS • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. F-type connector 1.
FRONT AND REAR CONTROL OPTIONS Main unit (front view) Upper control panel VOL (–)/(+) CH ( )/( ) MENU TV/VIDEO MAIN POWER VOL CH MENU TV/VIDEO Speaker MAIN POWER Speaker PC Card slot POWER SLEEP To change the vertical angle of the LCD TV set, tilt the screen up to 5 degrees forward or 10 degrees backward. The TV set can also be rotated 50 degrees horizontally. Please adjust the angle so that the TV set can be watched most comfortably.
FRONT AND REAR CONTROL OPTIONS (Continued) Main unit (rear view) COM Y PB PR L AUDIO R (L) (R) AV-IN2/OUT COMPONENT (L) (R) MENU TV/VIDEO L AUDIO R PONENT VIDEO AUDIO AUDIO Y PB PR AUDIO AUDIO CH VIDEO OUT AV-IN2/ MAIN POWER VOL VIDEO AV-IN1 PC Card PC Card slot AUDIO (L) AUDIO (R) S-VIDEO HEADPHONE Antenna terminal POWER INPUT (DC 12V) 12 VIDEO AV-IN 1 L AUDIO R S-VID EO HEAD PHON E ANT.
FRONT AND REAR CONTROL OPTIONS (Continued) Removing the Back Cover CH MENU TV/VIDEO ■ Before connecting a connection cord into the rear terminal, remove the back cover. Push in the tab and pull out the back cover carefully. MAIN POWER VOL ■ To mount the cover, insert the 2 hooks on the bottom of the cover into the cabinet and press on the upper part of the back cover until the tab locks in place with a click.
REMOTE CONTROL POWER POWER ENTER/ ]/[/(Cursor control) DISPLAY DISPLAY* 1 SLEEP CARD CARD*2 SLEEP ENTER MUTE MUTE BRIGHT TV/VIDEO MENU TV/VIDEO BRIGHT MENU FLASHBACK*3 FLASHBACK VOL CH VOL(+)/(–) CH ( MTS*4 1 2 3 4 5 6 7 8 9 MTS 0 100 )/( ) Channel Select *1 Displays the receiving channel for 10 seconds. *2 Turns on CARD mode to play back a memory card. *3 Returns to the previous channel. *4 Selects audio settings.
BASIC OPERATION (Continued) Turning on POWER 1 MAIN POWER Press MAIN POWER, located on the upper side of the main unit, to on. 2 POWER ▼ On-screen display 2 The POWER indicator instantaneously changes from red to green and the main unit is turned on. SLEEP Note ● POWER indicator The input mode indication disappears after several seconds. STEREO < ON A I R SAP MONO Notes: Switching TV/VIDEO [AV1/AV2/COMPONENT/CARD/TV] Modes POWER POWER 1 Turn on the power of the connected video equipment.
BASIC OPERATION (Continued) Sound Volume 1 POWER Press VOL (+) to increase the sound volume. The segment of the indicator increases. VOLUME 50 DISPLAY SLEEP CARD 2 ENTER MUTE BRIGHT MENU TV/VIDEO FLASHBACK VOL CH 1 2 3 4 5 6 7 8 9 MTS 0 100 Press VOL (–) to decrease the sound volume. The segment of the indicator decreases. VOLUME 10 MUTE VOL (+)/(–) To mute the sound 1 Press MUTE to temporarily turn off the sound. The MUTE mark is displayed for 4 seconds.
BASIC OPERATION (Continued) Changing the Channels Changing channels by using Channel Select on the remote control • This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2or 3-digit number. To select a 1- or 2-digit channel number (e.g., Channel 5): Complete the following procedure within 4 seconds. POWER DISPLAY SLEEP CARD ENTER MUTE BRIGHT 1 2 MENU TV/VIDEO FLASHBACK VOL CH Press the Press the 0– 5 button. 5 button.
SELECTING MENU ITEMS Selecting Menu Items • This LCD TV set allows you to adjust the various settings using the menu screen. Select the desired menu item by following the steps below and then refer to the indicated page for details. POWER DISPLAY SLEEP CARD Press MENU to display the MENU screen. 2 Press ]/[ to select the desired menu item, and press ENTER. 3 Press MENU to exit.
ADJUSTMENT Adjusting the SLEEP TIMER Settings You can set the SLEEP TIMER to automatically turn off the TV. SLEEP Directly setting the SLEEP TIMER POWER 1 Press SLEEP to display the SLEEP TIMER screen. 2 Press SLEEP to set the sleep timer (in minutes). DISPLAY SLEEP CARD ENTER MUTE BRIGHT FLASHBACK VOL The time can be set in increments of 30 minutes and in the range between 30 and 120 minutes.
ADJUSTMENT (Continued) Adjusting the BRIGHTNESS Settings You can set the brightness of the screen. Directly setting the BRIGHTNESS POWER DISPLAY SLEEP CARD 1 Press BRIGHT to display the BRIGHTNESS screen. 2 Press BRIGHT to change the setting. ENTER MUTE BRIGHT MENU TV/VIDEO BRIGHT FLASHBACK VOL NORMAL DARK CH BR I GHTNESS [ BR I GHT ] Note 1 2 3 4 5 6 7 8 9 MTS 0 100 BRIGHT ● ● The BRIGHTNESS screen automatically disappears in 3 seconds.
ADJUSTMENT (Continued) Adjusting the LANGUAGE Settings The language for the On-Screen Display can be ENGLISH, SPANISH or FRENCH. 1 Press MENU to display the MENU screen. POWER DISPLAY SLEEP CARD MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP ENTER MUTE BRIGHT MENU TV/VIDEO FLASHBACK VOL CH 1 2 3 4 5 6 7 8 9 MTS 0 100 ENTER/ ]/[ SELECT : 2 Press ]/[ to move the cursor to SET UP, and press ENTER.
ADJUSTMENT (Continued) Adjusting the VIDEO ADJUST Settings 1 Press MENU to display the MENU screen. POWER DISPLAY SLEEP MENU SLEEP T IMER V I DEO ADJUST PRESET CLOSED CAPT I ON V–CH I P BLOCK SET UP CARD ENTER MUTE BRIGHT MENU TV/VIDEO FLASHBACK VOL CH 1 2 3 4 5 6 7 8 9 MTS 0 100 ENTER/ ]/[/ SELECT : 2 MENU Press ]/[ to move the cursor to VIDEO ADJUST, and press ENTER. ENTER : Press ]/[ to move the cursor to the desired item, and press ENTER.
ADJUSTMENT (Continued) Adjusting the VIDEO ADJUST Settings (Continued) TV mode Selected item Press <. Press >. PICTURE Decrease contrast Increase contrast TINT Toward purple Toward green COLOR Lower color intensity Higher color intensity BLACK LEVEL Less bright More bright SHARPNESS Soft picture Sharp picture Selected item Press <. Press >.
ADJUSTMENT (Continued) Adjusting the PRESET Settings POWER 1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to PRESET, and press ENTER. 3 Press ]/[ to move the cursor to the desired item, and press ENTER.
ADJUSTMENT (Continued) SET UP ■ CHANNEL SETTING It is necessary to set the receiving mode to AIR or CABLE channels to receive locally broadcast TV programs. POWER 1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to SET UP, and press ENTER.
ADJUSTMENT (Continued) SET UP (Continued) ■ Saving broadcast TV channels in the memory 1 Press MENU to display the MENU screen, press ]/[ to move the cursor to SET UP, and press ENTER. 2 Press ]/[ to move the cursor to CH-SETTING, and press ENTER. 3 Press ]/[ to move the cursor to CH SEARCH, and press ENTER. 4 Press >. The tuner will search through all available channels in your area and add them to the TV’s memory.
ADJUSTMENT (Continued) Adjusting the BLUE SCREEN Settings ■ BLUE SCREEN Automatically turns the screen blue if a broadcast signal is not received. POWER 1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to SET UP, and press ENTER.
ADJUSTMENT (Continued) Adjusting the CLOSED CAPTION Settings ■ SETTING CLOSED CAPTION • This TV set is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen (see the illustration). • Not all the programs and videos will offer closed captioning. Please look for the “ ” symbol to ensure that captions will be shown.
ADJUSTMENT (Continued) Adjusting the V-CHIP Settings ■ V-CHIP • This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching violent or sexual scenes that may be harmful. • Restriction of TV programs includes two ratings that contain information about the program: the MPAA rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and content.
ADJUSTMENT (Continued) Adjusting the V-CHIP Settings (Continued) [2] TV PARENTAL GUIDELINES RATING ⇐ content base ⇒ FV (Fantasy Violence) V (Violence) S (Sexual Situation) L (Adult Language) D (Sexually Suggestive Dialog) ✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕ ✕ TV-Y (All children) ⇑ TV-Y7 (Direct to Older Children) TV-G (General Audience) age base TV-PG (Parental Guidance Suggested) ⇓ ✕ X xxx TV-14 (Parents Strongly Cautioned) X TV-MA (Mature Audience Only) X : The content rating can be set, but t
ADJUSTMENT (Continued) Adjusting the V-CHIP Settings (Continued) ■ SETTING V-CHIP [1] MPAA RATING 1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to V-CHIP BLOCK, and press ENTER. 3 INPUT SECRET NO. will be displayed. Input the 4-digit secret number by using the channel select keys.
ADJUSTMENT (Continued) Parent Control (V-CHIP Operation Continued) Adjusting the V-CHIP Settings (Continued) [2] TV GUIDELINES ■ Setting MPAA 1 Repeat steps 1 to 3 of [1] MPAA RATING. 2 Press ]/[ to move the cursor to TV GUIDELINES, and press ENTER.
ADJUSTMENT (Continued) Parent Control (V-CHIP Operation Continued) Adjusting the V-CHIP Settings (Continued) ■ Setting BLOCK CONTENT POWER 1 Repeat steps 1 to 3 of [1] MPAA RATING. 2 Press ]/[ to move the cursor to TV GUIDELINES, and press ENTER.
ADJUSTMENT (Continued) Adjusting the V-CHIP Settings (Continued) [3] ACTIVATE ON TO TURN ON V-CHIP BLOCK 1 Press MENU to display the MENU screen. 2 Press ]/[ to move the cursor to V-CHIP BLOCK, and press ENTER. 3 INPUT SECRET NO. will be displayed. Input the 4-digit secret number by using the channel select keys. (The secret number is not displayed on the screen.
ADJUSTMENT (Continued) Adjusting the V-CHIP Settings (Continued) [5] CHANGING THE V-CHIP BLOCK SETTINGS 1 POWER DISPLAY SLEEP Repeat steps 1 to 3 of [1] MPAA RATING, then INPUT SECRET NO. will be displayed. I NPUT SECRET NO . CARD – – – – ENTER MUTE BRIGHT MENU TV/VIDEO FLASHBACK VOL EX I T : MENU CH 1 2 3 4 5 6 7 8 9 MTS 0 100 2 Channel Select Input the 4-digit secret number by using the channel select keys; the V-CHIP select mode will be displayed. Set V-CHIP BLOCK again.
MEMORY CARD PLAYBACK Memory Cards ■ JPEG file images that have been recorded on the memory card using a digital camera or other device and that conform to the DCF standard* can be played back in CARD mode. * DCF (Design rule for Camera File system) is a standard of the Japan Electronics and Information Technology Industries Association (JEITA). This standard specifies the image file format used for images shot with a digital camera.
MEMORY CARD PLAYBACK (Continued) Card Precautions ■ Precautions on Handling Follow the precautions given below when handling the memory cards and PC card adapter as failure to do so may result in damage to data or malfunction. ● Playback of images stored on memory cards other than those listed in the table on page 36 is not guaranteed.
MEMORY CARD PLAYBACK (Continued) Preparation 1 Insert the memory card (commercially available) on which images have been recorded into the PC card adapter (commercially available). 2 Press POWER to turn off the LCD TV. POWER DISPLAY SLEEP * Example of inserting a memory card into a PC card adapter.
MEMORY CARD PLAYBACK (Continued) Turning on CARD Mode POWER 1 Press POWER to turn on the LCD TV. 2 Press CARD to change to CARD mode. ACCESSING DATA is displayed on the screen. CARD ACCESS I NG DATA POWER After data from the card is loaded, CARD is displayed on the screen.
MEMORY CARD PLAYBACK (Continued) Selecting the Playback Mode ■ CARD playback mode Images on the card are displayed one by one. It is possible to forward or reverse through the images. POWER 1 Press CARD to change to CARD playback mode. 2 Press to select the desired image to display. > cycles images in forward sequence, while < cycles images in reverse sequence. ACCESSING DATA is displayed until the next image is displayed.
MEMORY CARD PLAYBACK (Continued) Selecting the Playback Mode (Continued) ■ INDEX playback mode It is possible to display nine images at a time. 1 POWER DISPLAY SLEEP CARD I NDE X MODE Press CARD to switch to INDEX MODE. Nine images are displayed on the screen at a time. ENTER MUTE BRIGHT MENU TV/VIDEO CARD FLASHBACK VOL CH SELECT : 1 2 3 4 5 6 7 8 9 MTS 0 100 ENTER/ ]/[/ 2 SSELECT ELECT : Select an image using ]/[/, and press ENTER.
CARD ADJUSTMENT Selecting CARD SETTING Items CARD SETTING on the MENU screen can be used to make various settings such as SLIDE SHOW, MY PROGRAM, ROTATE and SOUND SETTING. Select the desired item by following the steps below and then refer to the indicated page for details. CARD 1 2 3 4 Turn on CARD mode. (see page 39) Press MENU to display the MENU screen. Press ]/[ to move the cursor to CARD SETTING, and press ENTER. Press ]/[ to select the desired setting item, and press ENTER.
CARD ADJUSTMENT (Continued) Adjusting the SLIDE SHOW Settings You can set the desired display time and playback order. REPEAT setting is also available. CARD POWER 1 Press CARD to change to CARD mode. 2 Press CARD to switch to SLIDE SHOW as the playback mode. 3 Press MENU to display the MENU screen. DISPLAY SLEEP CARD ENTER MUTE BRIGHT FLASHBACK VOL 4 MENU TV/VIDEO CH 1 2 3 4 5 6 7 8 9 MTS 0 100 ENTER/ ]/[/ Press ]/[ to move the cursor to CARD SETTING, and press ENTER.
CARD ADJUSTMENT (Continued) Adjusting the MY PROGRAM Settings You can select and register any of up to nine images from a large number of images. Images registered for MY PROGRAM are displayed in the specified sequence in SLIDE SHOW playback mode. ■ Registering MY PROGRAM Images CARD POWER DISPLAY SLEEP 1 Press CARD to change to CARD mode. 2 Press MENU to display the MENU screen, press ]/[ to move the cursor to CARD SETTING, and press ENTER to display the CARD SETTING screen.
CARD ADJUSTMENT (Continued) Adjusting the MY PROGRAM Settings (Continued) 6 Press ]/[/ to select the Selection marker (yellow) image to be registered, moving the MY PROGRAM selection marker (yellow) in the 1 2 selection area, and press ENTER. The image is then registered in the registration area that was specified in step 4. (see page 44) 7 Repeat steps 5 and 6 to register more images.
CARD ADJUSTMENT (Continued) Adjusting the ROTATE Settings • You can rotate a recorded image. • You can move to the next or previous image by selecting CHOOSE FILE even if you have not exited the ROTATE screen. ■ Rotating Images When the image that you want to rotate is displayed in CARD or SLIDE SHOW playback mode, follow the steps below to rotate the image. CARD 1 Press MENU to display the MENU screen, press ]/[ to move the cursor to CARD SETTING, and press ENTER to display the CARD SETTING screen.
CARD ADJUSTMENT (Continued) Adjusting the SOUND Settings You can listen to the audio from TV or external devices such as VCR or DVD player, etc. through the TV set while card playback. CARD POWER 1 Press CARD to change to CARD mode. 2 Press MENU to display the MENU screen, press ]/[ to move the cursor to CARD SETTING, and press ENTER to display the CARD SETTING screen. 3 Press ]/[ to move the cursor to SOUND SETTING, and press ENTER.
CONNECTING WITH EXTERNAL DEVICES You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of the TV set. When connecting an external device, turn off the power of the main unit first to prevent any possible damage.
CONNECTING WITH EXTERNAL DEVICES (Continued) Connecting a VCR, DVD player or a video camera (AV-IN1/2/COMPONENT) To AV-IN2 terminal VIDEO UT AV-IN2/O L AUDIO R Video ONENT Y COMP Audio (L) PB Audio (R) PR L To audio/video output terminal AUDIO R VCR To component input (Video) terminal Y CH MENU TV/VIDEO MAIN POWER VOL PB PR Audio (L) Audio (R) To component input (Audio) terminal DVD TUNER/BAND AUX 1 AUX 2 AUX 3 SURROUND ON/OFF DVD Player To AV-IN1 terminal Video VIDEO AV-IN Audio (L
CONNECTING WITH EXTERNAL DEVICES (Continued) Outputting video and audio (video output) You can output video and audio data from the TV set through the AV output terminals (AV-OUT). VIDEO OUT Connect a VCR, Audio amplifier, etc. AV-IN2/ L AUDIO R T PONEN CH MENU TV/VIDEO MAIN POWER VOL COM Y PB PR L AUDIO R Note AV2 has 2 OUT modes (see page 24).
TROUBLESHOOTING ■ Before calling for repair service, check the following items for possible remedies to the encountered symptoms. TV set Problem Sound Picture Picture There is no picture or sound. There is no picture. There is no picture from AV-IN 1. There is no sound. There is no picture or sound, just noise. Picture is not clear. Picture is light or improperly tinted. The picture is too dark. Remote control does not work.
TROUBLESHOOTING (Continued) Antenna Problem The picture is not sharp. Check item • • • • The reception may be weak. The state of the broadcast may also be bad. Make sure the antenna is facing the right direction. Make sure the outside antenna is not disconnected. The picture moves. The picture is doubled or tripled. The picture is spotted. There are stripes on the screen or colors fade. • Make sure the antenna is facing the right direction.
TROUBLESHOOTING (Continued) Card Problem Check item Reference Pages Data on the card cannot be played back. • Check if data is recorded on the memory card. • Check if CARD mode is turned on as the input selection. • Images which have been processed by a PC sometimes cannot be played back by this equipment. NO CARD INSERTED*1 is displayed. • Check that the memory card and/or PC card adapter are inserted. 38 NO IMAGE IN THE CARD*1 is displayed. • Use a memory card containing recorded image data.
SPECIFICATIONS Items LCD panel Number of dots Video color systems Destination TV Standard (CCIR) TV function TV Tuning System STEREO CATV 4-LINE COMB FILTER Brightness Lamp life Viewing angles Audio amplifier Speakers AV1 AV2 Terminals COMPONENT Antenna Headphone PC Card slot Image File Format OSD language Power supply Weight Accessories Model LC-15B1U 15” Advanced Super View & BLACK TFT LCD 921,600 dots VGA N358, N443, PAL, PAL-M, PAL-N, SECAM, PAL-60 USA/Latin A/Twn NTSC/PAL-M/PAL-N PLL 181 ch.
DIMENSIONAL DRAWINGS 2.41/61.1 2.22/56.5 Unit: inch/mm CH MENU TV/VIDEO MAIN POWER 2.59/66 VOL 19.1/484 9.0/229 11.9/303 15.0/381.7 5.9/149.5 12.0/305.3 11.9/301.6 3.9/98.8 VIDEO 14.4/365.2 AV-IN 2/OUT L AUDIO R COMPONENT 39.4/100 39.4/100 0.47/11.8 2.4/61.1 VIDEO AV-IN1 L AUDIO R S-VIDEO HEAD PHONE Y PB PR ANT. L AUDIO R POWER INPUT DC12V 1.1/27 5.9/149.5 1.9/48.5 7.
CALLING FOR SERVICE For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer assistance, please call 1-800-BE-SHARP.
VALID IN CANADA ONLY LIMITED WARRANTY Consumer Electronics Products Congratulations on your purchase! Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer: Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship.
