User Manual

30
■ To Pause Recording
Press
.
• When resuming the recording, press ●REC once more.
PAUSE
Lap : :3
SP/Remain video :32
2:18
0
0
0
0
0 0
■ To Stop Recording
Press ■.
• By pressing DISPLAY, you can confirm the conditions during
recording.
• Press DISPLAY again to switch off the screen display.
NOTE
• When MAIN POWER on the LCD TV set is pressed during
recording, the recording cannot be stopped normally creating the
danger the file is corrupted.
• Pressing POWER on the remote control during recording stops the
recording.
• When the card has no remaining capacity left, the information
display shows “Card is full” and the recording is stopped.
• During recording, you cannot switch to a different channel and you
cannot switch to another input.
• When the timer reaches the stop time, the recording will be stopped.
• When you select the COMPONENT mode, you cannot record a
motion picture.
• If the stop time is reached during timer recording the pause mode is
switched on, but timer recording will continue.
Easy Recording
When pressing ●REC again during normal recording, you
can easily switch to timer recording.
Each time you press ● REC, the recording time changes as follows.
Lap 0:30 1:00 1:30 2:00
Recording as a Motion Picture
Press DISPLAY to check that the desired recording mode
has been selected and that the memory card has enough
space for recording.
Press Channel Select, CH ( )/( ) or TV/VIDEO to
select the channel you want to record.
Press ●REC to start recording.
• The recording is started from the moment the button is
pressed.
REC
Lap : :3
SP/Remain video :35
2:15
0
0
0 0
0
0
* When the remaining time is indicated as [08:00], this means
you can record for eight more hours.
1
2
Recording a TV Programme in Real-time
Card Lamp
When recording: Red
MAIN POWER