User Manual

14
On-Screen Display Language Selection
Notes:
■ When starting the PRESET after setting
the SOUND SYSTEM with the MENU
button of Remote Control, the SOUND
SYSTEM for all channels are stored into
memory.
■ Unused channels are automatically
skipped.
■ The Preset mode is only available in the
TV mode and cannot be operated in the
AV mode.
PRESET
Sound System
NORMAL
SCREEN
Presetting the Channels (AUTO)
■ The MENU on the LCD TV set can
also be used to select the language.
■ Automatically tunes in and presets
receivable TV stations.
Make sure the antenna cable is
properly connected.
471.25MHz
UHF
471.25MHz
UHF
(Auto mode screen)
Upper control panel
1 Press the MENU on the upper part
of the LCD TV set for more than two
seconds to display the PRESET
mode screen.
2 Press the MENU twice to display
the LANGUAGE select mode
screen. Press the MENU again to
change the PRESET mode as
shown below.
AUTO → MANUAL → LANGUAGE →
3 Press the CH ( )/( ) to select
the language you wish to display.
4 Press the MENU to return to the
normal screen.
TV/VIDEO
DISPLAY
BRIGHTSLEEP
MENU
POWER
MPX
-/--
MENU
CH
VOL
Note:
■ Instead pressing the MENU button more
than two seconds, you can display the
LANGUAGE select mode by selecting
FEATURE → LANGUAGE on the
Menu screen.
12
VOL CH MENU TV/VIDEO
12
PRESET
1 Press the MENU (PRESET-1) on
the upper part of the LCD TV set
for more than two seconds. The
AUTO mode screen appears.
2 Press the VOL (+)/(–) (PRESET-
2) on the upper part of the LCD
TV set.
All the TV stations in your area
that can be received by the LCD
TV set are automatically preset.
3 The screen shows whatever is on
channel 1 when full auto channel
preset is finished.
VOL CH MENU TV/VIDEO
12
PRESET
1,2,43
LANGUAGE
ENGLISH
MENU
SELECT:
EXIT: