User Manual

10
BASIC OPERATION
Control section of main unit
1 Press the MAIN POWER switch,
located on the upper part of the
main unit to ON.
2 The Power/Standby indicator
instantaneously changes from red
to green and the main unit is turned
on.
▼ ON-screen display
Turning on POWER
Switching TV/VIDEO AV1/AV2/COMPONENT/TV Mode
Note:
■ Input mode indication disappears after
several seconds.
AV1 mode
AV2 mode
1 Turn on the power of the con-
nected video equipment.
2 Press the TV/VIDEO and select the
applicable input source. The screen
displays AV1, AV2, COMPONENT
or TV mode at the upper right
corner each time TV/VIDEO is
pressed.
■ AV input mode indication remains for
five seconds.
• AV1: Video equipment connected to the
AV1 input terminals.
An S-video input terminal is
additionally provided for the AV1
input. If both S-video terminal and
normal video terminals are
connected with cables, the S-
video input terminal is selected as
the high priority.
• AV2: AV2 mode is used to adjust the
preset settings and IN or OUT can
be selected. AV2 indication is not
displayed when OUT is selected.
(For details on setting AV-OUT,
see page 21.)
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
Notes:
TV/VIDEO
DISPLAY
BRIGHTSLEEP
MENU
POWER
MPX
-/--
POWER
TV/VIDEO
CH
VOL
I
I
COMPONENT mode
COMPONENT
TV mode
I
Power/Standby indicator
MAIN POWER