Operation Manual

22
1 Press MENU to display the MENU
screen.
ADJUSTMENT (Continued)
Adjusting the PRESET Settings
■ The PRESET items can be set by the
user.
Selected item Factory setting Setting change
MTS (Multi ch TV sound) [STEREO] STEREO AUDIO [SAP] Second Audio Program
[MONO] MONOPHONIC AUDIO
Brightness [BRIGHT] Maximum brightness [NORMAL] Brightness 60% → Suitable for viewing in well-lit areas.
Saves energy.
[DARK] Brightness 20%
→ Sufficiently bright when
viewing in dim areas.
Auto Power Off [OFF] [ON] The power of the LCD TV set is turned off when there is
(only TV mode) no signal for 5 minutes.
[OFF] This feature is inactivated.
UPSIDE [NORMAL] Normal vertical [DOWN] Inverted image → To display images upside down for
image orientation special uses.
RIGHT/LEFT [NORMAL] Normal horizontal [MIRROR] Mirror image → To display mirror images for special uses.
image orientation
AV1 [NORMAL] [COMPONENT]
AV2 IN/OUT [IN] [OUT ] Line Output is selected, Output volume is fixed, Speaker
output is available.
[OUT
] Line Output is selected, Output volume is variable,
Speaker output is Mute.
ABC
(MENU screen)
(PRESET screen)
2 Press CH (])/([) to move the
cursor to PRESET.
3 Press VOL (+)/(–) to display PRE-
SET screen.
4 Check the factory setting of each
item on the PRESET screen.
The user can change the settings by
using CH (])/([) and VOL (+)/(–).
5 Press MENU to return to the main
screen.
Note:
■ MTS mode cannot be selected when the indication is in magenta.
ABC
ABC
LC-12A2U-GBpp18-40 00.11.8, 9:07 AM22