ENGLISH DEUTSCH LB-1085 FRANÇAIS LCD MONITOR LCD FARBMONITOR MONITEUR LCD MONITOR LCD ЖК МОНИТОР РУССКИЙ ESPAÑOL OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE OPERACIÓN РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ ENGLISH.......EN1 DEUTSCH.....DE1 FRANÇAIS....FR1 ESPAÑOL......ES1 РУССКИЙ.....
FOR CUSTOMERS IN U.K.
ENGLISH LB-1085 LCD MONITOR ENGLISH IMPORTANT INFORMATION TOREDUCE REDUCE THE THE RISK OROR ELECTRIC SHOCK, DO NOT WARNING:TO RISKOF OFFIRE FIRE ELECTRIC SHOCK, DO WARNING: EXPOSE THIS THIS PRODUCT TO RAIN OR MOISTURE. NOT EXPOSE PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT INFORMATION The battery supplied with this product contains traces of Lead. For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with legislation. Please contact your local authority for details on the collection and recycling schemes. For Switzerland: The used battery is to be returned to the selling point.
IMPORTANT INFORMATION Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products. A. Information on Disposal for Users (private households) 1.
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp LCD Monitor. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
IMPORTANT SAFETY INSTRUCTIONS •• Turn off the main power and unplug the AC cord from the wall outlet before handling. •• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may scratch the panel surface. •• Use a soft damp cloth to gently wipe the panel when it is really dirty. (It may scratch the panel surface when wiped strongly.) •• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.
IMPORTANT SAFETY INSTRUCTIONS The fluorescent tubes in this product have a limited lifetime. •• When the screen becomes darker, flickers, or does not illuminate, contact your product dealer. •• You can check the total use time of the backlight by through the Identification menu options. (See page 26.) Estimated life: About 24,000 hours (The life varies depending on the use condition of the LCD Monitor.) •• Because of the property of fluorescent tubes, the screen may flash during the initial period of use.
Supplied Accessories Make sure the following accessories are provided with the product. AC cord Page 9 Remote control unit (x1) Page 10 R-6 battery (“AA” size) (x2) Page 10 AC cord clamp (x1) Page 9 M16 bolt cap (x2) Operation manual (x1) •• Do not use an AC cord other than the one supplied with the monitor. •• When the eye bolts on the top are removed, close the holes by pressing the M16 bolt caps into the holes. To remove the M16 bolt caps, turn them with a screw driver or coin.
QUICK REFERENCE Connecting External Speakers Speaker Compatibility: •• Be sure to use external speakers with an impedance of 4 ohm and a rated input of at least 15W. Connect the ends of the cables to the SPEAKER terminals as shown below. Connect the leads to the SPEAKER terminals of the same polarity. R L SPEAKER R terminal To external speaker (right) SPEAKER L terminal To external speaker (left) ■■Make sure to connect the speaker jack and cable polarity ( , ) properly.
QUICK REFERENCE When transporting the LCD Monitor Transporting the LCD Monitor requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. Before turning on the LCD Monitor 1 Connect the AC plug for the LCD Monitor into the AC outlet. 2 •• Be sure to turn OFF the main POWER on the rear of the LCD Monitor when connecting the cord. Fix the AC cord as shown below.
QUICK REFERENCE If the remote control fails to operate LCD Monitor functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two R-6 (“AA” size) batteries (supplied with the product). 3 Close the battery cover. •• Place the batteries with their terminals corresponding to the (+) and (-) indications in the battery compartment. CAUTION Use manganese or alkaline batteries only. Improper use of batteries can result in chemical leakage or explosion.
Contents IMPORTANT INFORMATION................................. 1 Trademarks............................................................ 3 DEAR SHARP CUSTOMER................................... 4 IMPORTANT SAFETY INSTRUCTIONS................ 4 Supplied Accessories........................................... 7 QUICK REFERENCE.............................................. 7 Installing the LCD Monitor onto a Stand............ 7 Installing the LCD Monitor on a Wall..................
Part Names LCD Monitor (Front) Remote control sensor OPC sensor (See page 23.) OPC indicator (See page 23.) SLEEP indicator (See page 18.) POWER indicator (See page 17.
Part Names 1 Remote Control Unit 7 1 8 2 3 9 4 10 5 11 6 POWER: Switch the LCD Monitor power on or enters standby. (See page 17.) 2 INPUT: Select an LCD Monitor input source. (INPUT 1, INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6, INPUT 7) (See page 19.) 3 SLEEP: Set the sleep timer. (See page 18.) 4 RETURN: Return to the previous menu screen. 5 AV MODE: Select an audio or video setting. (When the input source is INPUT 1, 2 or 3: STANDARD, MOVIE, GAME, USER, DYNAMIC (Fixed), DYNAMIC.
Preparation You can connect many types of external equipment to your LCD Monitor like a Blu-ray disc player, DVD player, VCR, Digital TV tuner, HDMI equipment, game console or camcorder. To view external source images, select the input source from INPUT on the remote control unit or on the LCD Monitor. (See page 19.) CAUTION •• To protect equipment, always turn off the LCD Monitor before connecting any external equipment. •• Please read the relevant operation manual (Blu-ray disc player, etc.
Preparation When using DVI Cable (INPUT 7): Blu-ray disc player/DVD player DVI cable (commercially available) Ø 3.5 mm stereo minijack cable (commercially available) •• To enjoy 1080p display capability, connect your external equipment using a component or DVI cable and set the equipment to 1080p output. Using Digital Audio Output It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. PCM audio outputs from the terminal.
Preparation Connecting a PC When connecting to a PC with a DVI terminal (INPUT 7): RGB/DVI conversion cable (commercially available) Ø 3.5 mm stereo minijack cable (commercially available) PC When connecting to a PC with an HDMI terminal (INPUT 4, 5 or 6): HDMI-certified cable (commercially available) PC •• The HDMI terminals only support digital signal. •• If you are connecting the LCD Monitor to a PC with a DVI terminal, use a DVI cable (commercially available) instead of a RGB/DVI conversion cable.
Turning On/Off the Power Press POWER on the LCD Monitor, or POWER on the remote control unit to turn the power on. POWER •• POWER indicator (Blue): The LCD Monitor is on. (After a few seconds, a window appears with sound.) •• The initial setup starts when the LCD Monitor powers on for the first time. If the LCD Monitor has been turned on before, the initial setup will not be invoked. For changing the settings of the initial setup, perform EZ setup on the Setup menu on page 25.
Direct Button Operation Changing Volume You can change the volume by pressing VOL / on the LCD Monitor or on the remote control unit. •• To increase the volume, press VOL . •• To decrease the volume, press VOL . 20 Audio status Output device Speaker Output Select Fixed Variable Variable sound Mute •• When “Output Select” is set to “Variable”, the indicator on the screen changes as shown below. 60 •• See page 27 for details on the Output Select function. MUTE Mutes the current sound output. Press MUTE.
Direct Button Operation INPUT AV MODE To view external source images, select the input source using INPUT on the remote control unit or on the LCD Monitor. 1 Press INPUT. AV MODE gives you several viewing options to choose from to best match the surrounding environment of the LCD Monitor, type of program watched or the type of image input from external equipment. 2 Press AV MODE. •• A list of selectable sources appears. Press INPUT again or press the input source.
Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE. 2 •• The View Mode menu displays. •• The menu lists the View Mode options selectable for the type of video signal currently being received. Press VIEW MODE or / while the View Mode menu is displayed to select a desired item on the menu. •• You can sequentially select a View Mode that has its own aspect ratio.
On-Screen Display Menu Menu Items For INPUT 1/2/3 Mode For HDMI/DVI Mode Picture Menu Picture Menu OPC................................................................................ Page 23 Backlight......................................................................... Page 23 Contrast ......................................................................... Page 23 Brightness ..................................................................... Page 23 Color ........................................
On-Screen Display Menu On-Screen Display Menu Operation Example Example Option Picture Audio Only OPC Backlight Contrast Off On On : Display +16 [+12] -16 [+30] [VIDEO] Input Select Output select [Fixed] Color System [Auto] 0 +40 Brightness [ 0] -30 +30 Game Play Time [Off] Color [ 0] -30 +30 Operation Lock Out [Off] Tint [ 0] -30 +30 Sharpness [ +2] -10 +10 Advanced Item displayed in yellow •• This indicates the item currently selected.
On-Screen Display Menu Picture Menu Adjusts the picture to your preference with the following picture settings. Example Picture OPC Off On On : Display Backlight [+12] -16 +16 Contrast [+30] 0 +40 Brightness [ 0] -30 +30 Color [ 0] -30 +30 Tint [ 0] -30 +30 Sharpness [ +2] -10 +10 Advanced Reset 1 2 3 4 Press MENU to display the MENU screen, and / to select “Picture”. then press Press / to select a specific adjustment item. •• Select “Advanced” and then press ENTER to set “C.M.
On-Screen Display Menu I/P Setting Converts input signals depending on the type of images. Fast: Suitable for fast-moving images Slow: Suitable for smooth images with low amounts of flickers Audio Menu You can adjust the sound quality to your preference with the following settings. Example Audio •• “I/P Setting” is not selectable when channel display shows an input resolution of 480P, 720P, or 1080P.
On-Screen Display Menu Power Control Menu Setup Menu Power control setting allows you to save energy. Example Example Setup Power Control 1 2 3 4 EZ Setup No Signal Off [Disable] Input Skip No Operation Off [Disable] Position Press MENU to display the MENU screen, and / to select “Power Control”. then press Press / to select a “No Signal Off” or “No Operation Off”, and then press ENTER. Press / to select “Enable”, and then press ENTER. Press MENU to exit.
On-Screen Display Menu Input Signal (for Analog PC Input Mode Only) Some input signals may have to be registered manually to display properly. The pair of input signals (resolutions) in the list below is not distinguishable when received. In such a case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.
On-Screen Display Menu Option Menu Example Option Audio Only Output Select 1 2 3 4 [Fixed] Game Play Time [Off] Operation Lock Out [Off] Press MENU to display the MENU screen, and / to select “Option”. then press Press / to select a specific adjustment item and then press ENTER. Press / (or / ) to select the desired setting, and then press ENTER. Press MENU to exit. Audio Only When listening to music from a music program, you can turn the screen off and enjoy audio only.
Appendix Troubleshooting Problem Possible Solution •• No power •• Check if you pressed POWER on the remote control unit. (See page 17.) If the indicator on the LCD Monitor does not light up, press POWER on the LCD Monitor. •• Is the AC cord disconnected? (See page 9.) •• Has the main POWER been turned ON? (See page 9.) •• Has the power been turned on? (See page 9.) •• Unit cannot be operated. •• External influences such as lightning, static electricity, may cause improper operation.
Appendix RS-232C Port Specifications ■■PC control of the LCD Monitor •• Connect the COM port of the PC (RS-232C connector) and the RS-232C terminal of the LCD Monitor with an RS-232 cable (cross-type, commercially-available product). ■■Command format Eight ASCII codes + CR C1 C2 C3 C4 P1 P2 P3 P4 Command 4-digits Parameter 4-digits •• This operation system should be used by a person who is accustomed to using computers.
Appendix Specifications Model LB-1085 LCD panel 108˝ screen size class Advanced Super View & BLACK TFT LCD (Diagonal Measurement: 2,732.7 mm) Resolution 2,073,600 pixels (1,920 x 1,080) Audio out 15W x 2 (4 Ω) Rear Terminals Side INPUT 1 COMPONENT in, Audio in INPUT 2 AV in, S-VIDEO in INPUT 4 HDMI in with HDCP INPUT 5 HDMI in with HDCP INPUT 6 Audio in, HDMI in with HDCP INPUT 7 DVI-I in with HDCP, Audio in (Ø 3.
Appendix Information on the Software License for This Product ■■Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
NOTE 32
Dimensional Drawings / Maßzeichnungen / Dimensions du moniteur / Dibujos de dimensiones / Чертежи с указанием размеров Unit: mm Einheit: mm Unité : mm Unidad: mm Блок: мм 2572 204 775 1348.4 1348,4 1550 1591 2390.2/2390,2 430 1290 215 1470 228 267 245 2572 204 1530 775 1348.4 1348,4 1550 224 1774 1815 2390.
SHARP CORPORATION Printed in Japan Gedruckt in Japan Imprimé au Japon Impreso en Japón Отпечатано в Японии CS2 08G DSC1 TINS-D842WJZZ
