Installation Manual
Table Of Contents
- Table of Contents
- Table of Tables
- Table of Figures
- 1. About this Manual
- 2. Safety
- 3. Package Removal and Inspection
- 4. Installation
- 5. Electrical Connections
- 5.1 The Overview of Electrical Connection
- 5.2 Opening the Front Case Cover
- 5.3 The Overview of the Connection Area
- 5.4 Battery Installation
- 5.5 Inner Wiring Connection (Power and Signal Wire Connection for BMS)
- 5.6 Closing the Front Case Cover
- 5.7 A Method of Locking the Distribution Box (Board)
- 5.8 An Installation Method of Energy Meter Electrical Connection
- 5.9 A Connecting Method of the DC Line from the PV
- 6. Communication Connection
- 7. Entering Initial Installation Information
- 7.1 Information Input Administrator
- 7.2 System Information input stage
- 7.3 PC Direct Connection and Local Setting Value
- 7.4 Web Page Connection
- 8. Operation Test
- 9. Problem Confirmation
- 10. Maintenance
- 11. Technical Specifications
- 12. Disassembly
- 13. Contact
10. Maintenance
10.4 The List of Replaceable Parts
The [Table 10-1] shows the list of parts replaceable for maintenance of this system.
For the parts other than presented here, please refer to the application notes linked on the
SAMSUNG SDI website, or contact the installer or the service center.
No. Part Name Manufacturer Part number
1 Li-Ion Battery Tray SAMSUNG SDI -
2 PV connector Multi-Contact AG c/o
Stäubli Group
PV STICK
3 Fan1 Minebia manufacturing
company
4710KL-04W-B59-E00
4 Fan2 Minebia manufacturing
company
4710KL-04W-B59-E00
[Table 10-1: Replaceable parts list]
10.4.1 Li-Ion Battery Tray
The Li-Ion battery module can be replaced if it fails to work properly. The 3.6 kWh system
uses a battery tray with a 2-battery module manufactured by SAMSUNG SDI. When you have
to replace the battery module, please contact SAMSUNG SDI and provide the item's name
and the serial number of the 3.6 kWh All In One system.
[Figure 10-4: Li-Ion Battery tray (manufactured by SAMSUNG SDI)]
United Kingdom (Eng.) 05/2015. Rev1.1 85