Installation Manual
Table Of Contents
- Table of Contents
- Table of Tables
- Table of Figures
- 1. About this Manual
- 2. Safety
- 3. Package Removal and Inspection
- 4. Installation
- 5. Electrical Connections
- 5.1 The Overview of Electrical Connection
- 5.2 Opening the Front Case Cover
- 5.3 The Overview of the Connection Area
- 5.4 Battery Installation
- 5.5 Inner Wiring Connection (Power and Signal Wire Connection for BMS)
- 5.6 Closing the Front Case Cover
- 5.7 A Method of Locking the Distribution Box (Board)
- 5.8 An Installation Method of Energy Meter Electrical Connection
- 5.9 A Connecting Method of the DC Line from the PV
- 6. Communication Connection
- 7. Entering Initial Installation Information
- 7.1 Information Input Administrator
- 7.2 System Information input stage
- 7.3 PC Direct Connection and Local Setting Value
- 7.4 Web Page Connection
- 8. Operation Test
- 9. Problem Confirmation
- 10. Maintenance
- 11. Technical Specifications
- 12. Disassembly
- 13. Contact
9. Problem Confirmation
Type Code Description Measures
automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant
event.
[Table 9-4: PV general events protection list]
9.1.5 System General Events (Protection)
Type Code Description Measures
PROTECTION E401 TEMPERATURE
Protection
When the switch temperature is high.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant
event.
PROTECTION E402 OVER CURRENT
TZ FAULT
Occurs on INVERTER hardware protection.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant
event.
PROTECTION E403 TEMPERATURE
SENSOR
When the temperature sensor connection is
abnormal.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
PROTECTION E404 PV MIS-WIRING When the PV mis-wiring states is abnormal.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
[Table 9-5: System general events protection list]
74 United Kingdom (Eng.) 05/2015. Rev1.1