Installation Manual
Table Of Contents
- Table of Contents
- Table of Tables
- Table of Figures
- 1. About this Manual
- 2. Safety
- 3. Package Removal and Inspection
- 4. Installation
- 5. Electrical Connections
- 5.1 The Overview of Electrical Connection
- 5.2 Opening the Front Case Cover
- 5.3 The Overview of the Connection Area
- 5.4 Battery Installation
- 5.5 Inner Wiring Connection (Power and Signal Wire Connection for BMS)
- 5.6 Closing the Front Case Cover
- 5.7 A Method of Locking the Distribution Box (Board)
- 5.8 An Installation Method of Energy Meter Electrical Connection
- 5.9 A Connecting Method of the DC Line from the PV
- 6. Communication Connection
- 7. Entering Initial Installation Information
- 7.1 Information Input Administrator
- 7.2 System Information input stage
- 7.3 PC Direct Connection and Local Setting Value
- 7.4 Web Page Connection
- 8. Operation Test
- 9. Problem Confirmation
- 10. Maintenance
- 11. Technical Specifications
- 12. Disassembly
- 13. Contact
9. Problem Confirmation
Type Code Description Measures
If it is not removed until the time limit is
reached, it is converted to a significant
event.
PROTECTION E0205 NORMAL GRID
OFF
While in progress, battery
discharged/charged operation is terminated
through the protection function.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant
event.
PROTECTION E206 NORMAL BATT
STATUS EVENT
While in progress, battery
discharged/charged operation is terminated
through the protection function.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant
event.
PROTECTION E207 NORMAL INV DC
LINK EVENT
While in progress, battery
discharged/charged operation is terminated
through the protection function.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant
event.
PROTECTION E208 NORMAL BATT V
& BATT I & BDC
DC LINK EVENT
While in progress, battery
discharged/charged operation is terminated
through the protection function.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant
event.
[Table 9-3: Battery operation general events list
72 United Kingdom (Eng.) 05/2015. Rev1.1