Installation Manual
Table Of Contents
- Table of Contents
- Table of Tables
- Table of Figures
- 1. About this Manual
- 2. Safety
- 3. Package Removal and Inspection
- 4. Installation
- 5. Electrical Connections
- 5.1 The Overview of Electrical Connection
- 5.2 Opening the Front Case Cover
- 5.3 The Overview of the Connection Area
- 5.4 Battery Installation
- 5.5 Inner Wiring Connection (Power and Signal Wire Connection for BMS)
- 5.6 Closing the Front Case Cover
- 5.7 A Method of Locking the Distribution Box (Board)
- 5.8 An Installation Method of Energy Meter Electrical Connection
- 5.9 A Connecting Method of the DC Line from the PV
- 6. Communication Connection
- 7. Entering Initial Installation Information
- 7.1 Information Input Administrator
- 7.2 System Information input stage
- 7.3 PC Direct Connection and Local Setting Value
- 7.4 Web Page Connection
- 8. Operation Test
- 9. Problem Confirmation
- 10. Maintenance
- 11. Technical Specifications
- 12. Disassembly
- 13. Contact
9. Problem Confirmation
Type Code Description Measures
CURRENT
PROTECTION
because a significant PROTECTION event
has occurred.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant
event.
[Table 9-2: Inverter protection list]
9.1.3 Battery Discharge General Events
Type Code Description Measures
PROTECTION E201 ON SEQUENCE
GRID OFF
While in progress, battery
discharged/charged operation is terminated
through the protection function.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant
event.
PROTECTION E202 ON SEQUENCE
BAT T STATUS
EVENT
While in progress, battery
discharged/charged operation is terminated
through the protection function.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant
event.
PROTECTION E203 ON SEQUENCE
INV DC LINK
EVENT
While in progress, battery
discharged/charged operation is terminated
through the protection function.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant
event.
PROTECTION E204 ON SEQUENCE
BAT T V & BATT I
EVENT
While in progress, battery
discharged/charged operation is terminated
through the protection function.
Wait until the event message disappears.
After the event message is removed, it
automatically returns to normal.
United Kingdom (Eng.) 05/2015. Rev1.1 71