Installation Manual
Table Of Contents
- Table of Contents
- Table of Tables
- Table of Figures
- 1. About this Manual
- 2. Safety
- 3. Package Removal and Inspection
- 4. Installation
- 5. Electrical Connections
- 5.1 The Overview of Electrical Connection
- 5.2 Opening the Front Case Cover
- 5.3 The Overview of the Connection Area
- 5.4 Battery Installation
- 5.5 Inner Wiring Connection (Power and Signal Wire Connection for BMS)
- 5.6 Closing the Front Case Cover
- 5.7 A Method of Locking the Distribution Box (Board)
- 5.8 An Installation Method of Energy Meter Electrical Connection
- 5.9 A Connecting Method of the DC Line from the PV
- 6. Communication Connection
- 7. Entering Initial Installation Information
- 7.1 Information Input Administrator
- 7.2 System Information input stage
- 7.3 PC Direct Connection and Local Setting Value
- 7.4 Web Page Connection
- 8. Operation Test
- 9. Problem Confirmation
- 10. Maintenance
- 11. Technical Specifications
- 12. Disassembly
- 13. Contact
9. Problem Confirmation
9. Problem Confirmation
Checking event codes is available on the website (https://myess.samsungsdi.com).
If the Internet is not available, the event codes cannot be checked.
9.1 General Events
The general events contain warnings and protection.
The warning level events does not stop the generating process. A displayed warning
message automatically disappears as soon as the issue is resolved.
When protection level events occur, the product stop the generating process. The process
may automatically resume as long as the issue is resolved.
9.1.1 INVERTER General Events (Warnings)
Type Code Description Measures
WARNING E001 GRID UNDER
VOLTAG E
When the system voltage drops below
standard level.
This is the overall voltage-current warning
message, with no special change in the
sequence.
The warning message disappears on
reversion to the normal state.
E002 GRID OVER
VOLTAG E
When the system voltage rises above
standard level.
This is the overall voltage-current warning
message, with no special change in the
sequence. The warning message disappears
on reversion to the normal state.
E003 BATT UNDER
VOLTAG E
When the battery energy voltage drops
below standard level.
This is the overall voltage-current warning
message, with no special change in the
sequence. The warning message disappears
on reversion to the normal state.
E004 BATT OVER
VOLTAG E
When the battery energy voltage drops
above standard level.
This is the overall voltage-current warning
message, with no special change in the
sequence. The warning message disappears
on reversion to the normal state.
E005 FAN WARNING When the Fan operation is abnormal.
This is the overall Fan warning message,
with no special change in the sequence.
The warning message disappears on
68 United Kingdom (Eng.) 05/2015. Rev1.1