Installation Manual
Table Of Contents
- Table of Contents
- Table of Tables
- Table of Figures
- 1. About this Manual
- 2. Safety
- 3. Package Removal and Inspection
- 4. Installation
- 5. Electrical Connections
- 5.1 The Overview of Electrical Connection
- 5.2 Opening the Front Case Cover
- 5.3 The Overview of the Connection Area
- 5.4 Battery Installation
- 5.5 Inner Wiring Connection (Power and Signal Wire Connection for BMS)
- 5.6 Closing the Front Case Cover
- 5.7 A Method of Locking the Distribution Box (Board)
- 5.8 An Installation Method of Energy Meter Electrical Connection
- 5.9 A Connecting Method of the DC Line from the PV
- 6. Communication Connection
- 7. Entering Initial Installation Information
- 7.1 Information Input Administrator
- 7.2 System Information input stage
- 7.3 PC Direct Connection and Local Setting Value
- 7.4 Web Page Connection
- 8. Operation Test
- 9. Problem Confirmation
- 10. Maintenance
- 11. Technical Specifications
- 12. Disassembly
- 13. Contact
6. Communication Connection
6. Communication Connection
6.1 Internet Connection
6.1.1 Components
Wired Router (not provided in the product package)
RJ45 general LAN Cable (not provided in the product package)
6.1.2 Connection Block Diagram
LAN (Common carrier → Router) → ESS
[Figure 6-1: Internet Connection]
6.1.3 Connection Method
As shown in Subsection 6.4 on the communication terminal part, plug the RJ45 LAN Cable
between the LAN terminal and the Router.
42 United Kingdom (Eng.) 05/2015. Rev1.1